OPERATION
EMERGENCY STARTING
If the recoil starter is not working properly, the engine can be started with
the spare starter rope in the tool kit.
1. Remove the engine cover.
2. Follow steps 1 through 4 of the normal engine starting procedure (see
pages 26 and 27).
3. Wind the spare rope clockwise around the pulley, and then pull it
straight out to start the engine. Keep clear of moving parts.
4. Leave the recoil starter
off
and reinstall engine cover.
Exposed
moving
parts can cause in-
jury. Use extreme care when installing
the engine
cover. Do not operate
the
outboard
motor
without
the engine
cover.
STARTER ROPE
30