Fuel Filter Replacement - Honda BF5A Owner's Manual

SERVICING YOUR HONDA OUTBOARD MOTOR
6. Check that the spark plug washer are in good condition, and thread the
spark plug in by hand to prevent cross-threading.
7. After the spark plug are seated, tighten with a spark plug wrench to
compress the washer.
If installing a new spark plugs, tighten l/2 turn after the spark plugs seat to
compress the washers. If reinstalling a used spark plugs, tighten l/8-1/4 turn
after the spark plugs seats to compress the washers.
8. Install the engine cover.
fTEii%-1
. The spark plug must be securely tightened. Improperly tightened plug can
become very hot and may cause engine damage.
l
Use only the recommended spark plug or equivalent. Spark plug which
have an improper heat range may cause engine damage.
FUEL FILTER REPLACEMENT
The fuel filter is located between the fuel pump and the carburetor. Water or
sediment accumulated in the fuel filter can cause loss of power or hard
starting. To prevent engine malfunction, replace the fuel filter regularly.
Gasoline is highly flammable and explosive.
You can be burned or seriously injured when
handling fuel.
l
Keep heat, sparks and flame away.
l
Handle fuel only outdoors.
l
Wipe up spills immediately.
52