Motor Angle Adjustment - Honda BF5A Owner's Manual

MOTOR ANGLE ADJUSTMENT
If the propeller shaft is not parallel
with the water surface, adjust by
changing the transom angle adjust-
ing rod position.
There are four adjusting stages.
1. Push in (A) the adjusting rod,
twist upwards (B) and pull out to
remove.
2. Inserting the rod in the proper
hole, twist it down to lock.
1 NOTICE 1
To prevent damage to the motor or
boat, make sure the transom angle
adjusting rod is locked.
TRANSdM ANGLE
ADJUSTING ROD
TO CHANGE I
UNLOCKED
TO LOCK
POSITION
LO&ED POSITION
21