Introduction; How To Obtain Parts - Fluke 5520A Service Manual

5-1. Introduction

This chapter contains an illustrated list of replaceable parts for Fluke model 5520A
Multi-Product Calibrator. Parts are listed by assembly; alphabetized by reference
designator. Each assembly is accompanied by an illustration showing the location of each
part and its reference designator. Refer to Tables 5-1 through 5-3.
The parts lists give the following information:
Reference designator (for example, "R52")
An indication if the part is subject to damage by static discharge (* near the part
description)
Description
Fluke stock number
Total quantity
Any special notes (i.e., factory-selected part)
A * symbol indicates a device that may be damaged by static
discharge.

5-2. How to Obtain Parts

Electronic components may be ordered directly from the Fluke Corporation and its
authorized representatives by using the part number under the heading Fluke Stock No.
Parts price information is available from the Fluke Corporation or its representatives.
To contact Fluke, call one of the following telephone numbers:
1-888-99FLUKE (1-888-993-5853) in U.S.A.
1-800-36-FLUKE (1-800-363-5853) in Canada
+31-402-678-200 in Europe
+81-3-3434-0181 Japan
+65-738-5655 Singapore
+1-425-446-5500 from other countries
Or, visit the Fluke web site at www.fluke.com. A list of service centers is available on
the Fluke web site.
In the event that the part ordered has been replaced by a new or improved part, the
replacement will be accompanied by an explanatory note and installation instructions, if
necessary.
To ensure prompt delivery of the correct part, include the following information when
you place an order:
Instrument model and serial number
Part number and revision level of the pca (printed circuit assembly) containing the
part.
Reference designator
Fluke stock number
Description (as given under the Description heading)
Quantity
WCaution
List of Replaceable Parts
Introduction
5
5-3