4.
Attach the Left and Right Seat Brackets (14, 15)
to the Seat Frame (5) with two M8 x 125mm
Bolts (62), four M8 Washers (54), and two M8
Locknuts (10) as shown. Do not tighten
the
Locknuts
yet.
5.
Attach a Seat Handle (59) to the round tube on
the Left Seat Bracket (14) with two M6 x 30ram
Button Bolts (64), two M6 Curved Washers (69),
and two M6 Locknuts (63).
Attach the other Seat Handle (59) to the
Right Seat Bracket (t5) in the same way.
.
Attach the Backrest (60) to the Seat Brackets
(14, 15) with four M6 x 35mm Button Screws
(61) and four M6 Washers (68).
See step 4. Tighten the two M8 Locknuts (10).