Weslo PURSUIT CT 3.8R User Manual page 6

Turn the Front Stabilizer (2) so that the large
holes are facing the Frame (1). Attach the Front
Stabilizer to the Frame with two M10 x 60mm
Button Screws (33).
Holes
2,
Attach the Rear Stabilizer (6) to the Seat Frame
(5) with two M10 x 75ram Carriage Bolts (30)
and two M10 Locknuts (65).
2
30
,
Insert the end of the Seat Frame (5) into the
Frame (1). Next, firmly press the Frame
Bushing (56) into the Frame. Attach the Frame
Bushing to the Frame with two M4 x 5mm Self-
tapping Screws (66). Then, tighten the
Adjustment Knob (9) into the Frame.
Carefully tip the exercise cycle onto its side.
Attach the two Bumpers (57) to the Frame (1)
with two M4 x 8mm Screws (29) and two M4
Washers (70). Then, tip the exercise cycle
upright.
56
5
6