Teradici APEX 2800 Quick Start Manual

Teradici APEX™ 2800 Server Offload Card By EVGA
®

Quick Start Guide

Thank you for purchasing the Teradici APEX 2800 server offload card by EVGA.
This Quick Start Guide will help you to install and configure your APEX 2800 card.
Package Contents
• APEX 2800 card
• Quick Start Guide (this document)
System requirements
• PCI Express x8 compatible card slot
• VMware ESXi 4.1 or 5.0
• VMware View™ 4.6 or 5.0
• PCoIP Zero Client (3.4.x or later) or VMware View client (4.6 or later)
• Supported virtual machine operating systems:
• Windows XP
• Windows Vista
• Windows 7 (32 and 64-bit)
• PCoIP ® protocol optimized network
• Maximum of two (2) Teradici APEX 2800 cards per server
• Obtain the latest drivers at www.evga.com/support/download
© 2004-2012 Teradici Corporation. All rights reserved.
Teradici, PCoIP, PC-over-IP, and APEX are trademarks of Teradici Corporation and may be registered in the United States and/or other countries.
All other trademarks are properties of their respective owners. Specifications are subject to change without notice.
TER1104010-5
The Teradici APEX 2800 server offload card by EVGA is specifically designed to
offload PCoIP image encoding from the server's CPU, significantly reducing CPU
utilization and ensuring consistent application performance.
Compatible endpoint devices
Distributed network
PCoIP zero clients
zero management
PCoIP displays and phones
reduced cost, footprint
Send encoded pixels only
PCoIP soft clients
mobile platforms
Virtual desktops
PCoIP soft clients
existing desktops
thin clients
WARNING
1. Always power down and disconnect devices from AC power before handling
them, as some circuitry on the server PC can continue to operate even though
the front panel power switch is OFF.
Failure to disconnect the device from AC power can result in personal
injury or equipment damage.
2. Always ensure correct anti-static handling is observed to avoid potential ESD
damage in the card.
1
Install the APEX 2800 card
1. Make sure all virtual machines hosted by the server are powered down or
migrated to another server before continuing.
2. In the VMware vSphere client, right click on the ESXi server in the inventory
and select Enter Maintenance Mode.
3. Make sure the server is turned off and disconnected from AC power.
4. Insert the APEX 2800 into a free PCI Express slot and secure the metal
bracket.
5. Plug the server into a surge-protected AC outlet and power on.
©2000-2012 EVGA Corp. EVGA, EVBot, the EVBot logo, the EVGA logo and combinations thereof are trademarks of EVGA Corp. All rights reserved Inc.
All brands, products and companies are trademarks or registered trademarks of their respective companies. EVGA Corp. reserves the right to change
product specifications without prior notice.
2
Install the ESXi driver package
1. Enable remote login on the VMware ESXi server:
a. Press F2 to enter customization.
b. Enter your User name and Password.
c. Enable SSH.
• ESXi 4.1
Select Troubleshooting Mode Options > Enable Remote Tech Support
(SSH)
• ESXi 5.0
Select Troubleshooting Mode Options > Enable SSH
2. Copy the driver package from your PC to the ESXi server using secure copy:
a. Download and install WinSCP (Windows Secure Copy) on your PC.
b. Start WinSCP and specify your ESXi server Host name (IP address), User
name and Password.
c. Make sure the File protocol is SCP.
d. Click Login.
e. Drag the apex2800-version-esxi-version-xxxxxx.zip package to the /tmp
folder on your ESXi server.