Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

 
SONY
4-088-847-11
KP- 51WS500
KP- 57WS500
KP- 65WS500

Summary of Contents

  • Page 1

    SONY 4-088-847-11 KP- 51WS500 KP- 57WS500 KP- 65WS500...

  • Page 2

    WARNING Note on Caption Vision This television receiver provides display of television To prevent fire or shock hazard, do not closed captioning in accordance with § 15.119 of the FCC expose the projection TV to rain or rules. moisture. Note on convergence adjustment Before you use your projection...

  • Page 3

    The model and serial numbers are located at the rear of the cabinet, unplug the projection TV immediately projection TV, below the Sony logo, on the sticker, and have it checked by qualified service personnel before also on the TV box (white label). Record these numbers in operating it further.

  • Page 4

    IMPORTANTSAFEGUARDS Overloading Do not overload wall outlets, extension cords or convenience receptacles For your protection, please read these instructions beyond their capacity, since this can completely, and keep this manual for future reference. result in fire or electric shock. Carefully observe and comply with all warnings, cautions Always turn the set off when it is not...

  • Page 5

    LINES to the set. Use only a cart or stand OR CIRCUITS AS CONTACT WITH THEM IS recommended by Sony for the ALMOST INVARIABLY FATAL. specific model of TV. No part of the TV set should overhang any edge of...

  • Page 6

    Lightning Safety Check For added protection for this television receiver during a Upon completion of any service or repairs to the set, ask the service technician lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet perform routine safety checks (as specified and disconnect...

  • Page 7: Table Of Contents

    Contents Introducing the Sony Projection TV Using the Menus Presenting the Sony Projection TV ......Overview ..............Using this manual ............ Using the Video Menu .......... Using the Audio Menu .......... Installing and Connecting Using the Channel Menu ........Using the Wide Menu ...........

  • Page 8

    Presenting the Sony Projection Thank you for purchasing the Sony Projection This manual is for models KP-5 IWS500, KP-57WS500, and KP-65WS500. KP-5 IWS500 is used for illustration purposes. Features Some of the features that you will enjoy with your new projection...

  • Page 9

    Introducing the Sony Projection Wide Screen Mode: Allows you to watch 4:3 normal broadcasts wide screen mode (16:9 aspect ratio). Auto Wide: Allows you to select the wide screen mode automatically. Flash Focusr_: Allows you to adjust convergence automatically. Digital Visual Interface...

  • Page 10: Inserting Batteries Into The Remote Control

    Contents The box contains your new projection TV, a remote control and two AA batteries. No peripheral cables are included. If you intend to add additional equipment to your projection TV, please check the hookup instructions your desired setup before you begin. You may need to purchase cables and/ or splitters to complete the hookup properly.

  • Page 11

    Installing and Connecting the Projection Carrying Your Projection Carrying the projection TV requires three (4) or more people. The projection TV has been equipped with casters for easy movement on a hard surface. Please move your projection TV using the casters. Handle (one on each side) r="...

  • Page 12

    PB (CB, Cbor B-Y) - Blue PR (CR, Cr or R-Y) - Red CONTROL S cable CONTROL S connections are exclusive to Sony products and allow greater control of all Sony equipment. Push into connection. DVI cable DVI connection for a high-bandwidth copy-protected signal .,,._...

  • Page 13

    Installing and Connecting the Projection Projection TV Controls and Connectors Front Panel Menu The front panel menu controls allow access to the on-screen menus without Co n tro Is the use of a remote control. Pressing MENU brings up the on-screen menus.

  • Page 14

    Installing and Connecting the Projection Projection TV Rear and Front Panel Rear of projection TV DVI- HDTV IN Connectors VIDEO CONVERTER O---- ÷@@G VHF/UHF vl_o llVIDEO: VIDEC VIDEO 5 VIDEO 6 Front of projection TV IDE021...

  • Page 15

    S OUT jack on the projection TV with the CONTROL S cable. To control the projection TV with a remote control for another Sony product, connect the CONTROL S OUT jack of the equipment to the CONTROL S IN jack on the projection TV with the CONTROL S cable.

  • Page 16: Antenna

    Installing and Connecting the Projection Basic Connections (Connecting Cable TV or Antenna) Connecting Directly The connection you choose depends on the cable found in your home. Newer to Cable or an homes are equipped with standard coaxial cable (see []); older homes Antenna probably have 300-ohm...

  • Page 17

    Installing and Connecting the Projection Cable Box Cable Box and Cable Connections This is the preferred basic cable TV hookup to use if: Your cable TV company scrambles some channels, but not all of them (pay channels vs. regular cable channels) and you need to use a cable box, and You want to enjoy the Twin View feature.

  • Page 18

    Installing and Connecting the Projection Cable Box Only Use this hookup You subscribe to a cable TV system that uses scrambled or encoded signals requiring a cable box to view all channels, You do not intend to hook up any other audio or video equipment...

  • Page 19: Connecting A Vcr And Cable

    Installing and Connecting the Projection Connecting a VCR and Cable Use this hookup if: You have cable TV that does not require a cable box. Disconnect all power sources before making any connections• Connect the cable TV cable to the VCR's IN jack.

  • Page 20

    121 Use the projection TV remote control to change channels on your cable box when the signal is scrambled. To program your Sony remote control to operate your cable box, see "Programming the Remote Control" page 68. Use the projection...

  • Page 21

    Installing and Connecting the Projection AUDIO R AUDtO L VIDEO VIDEO YC-15V/30V (not supplied) VIDEO (yellow) VMC-810S/820S (not supplied) AUDIO-L (white) Cable box i S VIDEO d ADDIO-R (red) @-@"i -'_ "-I ÷ ¢ e oe _ VHF/UHF Coaxial cable _/IDE01 VIDEO3 IIDEION4...

  • Page 22

    Installing and Connecting the Projection Connecting Two VCRs for Tape Editing If you connect two VCRs, you can record from one VCR to the other while using your projection TV to monitor what is being recorded. Disconnect all power sources before making any connections. Using AUDIO and VIDEO cables, connect the playback VCR's Audio...

  • Page 23

    Installing and Connecting the Projection Connecting a Satellite Receiver Disconnect all power sources before making any connections. Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. Using AUDIO and S VIDEO cables, connect the satellite receiver's AUDIO and S VIDEO OUT jacks to the projection TV's AUDIO and S VIDEO IN jacks.

  • Page 24

    Installing and Connecting the Projection Connecting a Satelfite Receiver with a VCR Disconnect all power sources before making any connections. Connect the satellite antenna cable to the satellite receiver's SATELLITE IN jack. Connect the CATV cable to the VCR's VHFFUHF IN jack. Using a coaxial cable, connect the VCR's OUT jack to the projection TV' s VHF/UHF...

  • Page 25: Connecting An Audio Receiver

    Installing and Connecting the Projection Connecting an Audio Receiver Disconnect all power sources before making any connections. Using audio cables, connect the projection TV's AUDIO OUT (VAR/HX) jacks to the audio receiver's audio LINE IN jacks. Rear of projection @-@Y s_ge0 5"...

  • Page 26: Connecting A Dvd Player With Component

    Installing and Connecting the Projection Connecting a DVD Player with Component Wdeo Connectors This is the preferred hookup to use if: Your DVD player has component (Y, B-Y, R-Y) jacks. Disconnect all power sources before making any connections. Using three separate component video cables, connect the DVD player's Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the projection Use the VIDEO IN 5 or 6 connections.

  • Page 27

    Installing and Connecting the Projection Connecting a DVD Player with AN Connectors Use this hookup Your player does not have component (Y, PB, PR) jacks. If your D_ piayerhasvideo compohb_t _ UtPUtconnectors! f or best picture quality use the connection describedon page26, Disconnect all power sources before making...

  • Page 28: Connecting A Digital Tv Receiver

    Installing and Connecting the Projection Connecting a Digital TV Receiver Disconnect all power sources before making any connections. I3e sure to read the Using three separate component video cables, connect the Digital Set-top box manual. Set-top box's Y, Pa and PRjacks to the projection Some Digital TV Receivers...

  • Page 29: Connecting A Camcorder

    Installing and Connecting the Projection Connecting a Camcorder For easy connection of the camcorder, the projection TV has front Audio and Video inputs (shown below). However, if you prefer, you can also connect the camcorder to the projection TV's rear Audio and Video IN jacks. Using AUDIO and S VIDEO cables, connect the camcorder's Audio and S VIDEO...

  • Page 30: Connecting An Av Receiver

    Installing and Connecting the Projection Connecting an AV Receiver For greater control of all audio and video equipment, connect an AV receiver. Disconnect all power sources before making any connections. Connect the coaxial cable from the incoming cable connection antenna to IN on the VCR. Using a coaxial cable, connect OUT on the VCR to VHF/UHF on the projection...

  • Page 31: Using The Control S Feature

    Projection Using the CONTROL S Feature CONTROL S allows you to control your projection TV system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the CONTROL...

  • Page 32

    Installing and Connecting the Projection Setting Up the Projection TV Automatically After you finish connecting your projection TV, you can run Auto Setup to set up your channels. The Auto Setup screen appears when you turn your projection TV on for the first time after installing it.

  • Page 33: Adjusting The Convergence Automatically

    Installing and Connecting the Projection "IV Adjusting the Convergence Automatically- FLASH FOCUS The projection tube image appears on the screen in three colors (red, green and blue). If they do not converge, the color is poor and the picture blurs. Before you use your projection TV, be sure to adjust the convergence.

  • Page 34: Using The Remote Control

    Press repeatedly to step through the available video picture modes: Vivid, Standard, Movie and Pro. Also available the Video menu. For details, see "'Selecting Video Options" SONY on page 4-9. RM ygO_ FAVORITEs Displays the Favorite Channels list. For details, see "'Using Favorite Channels"...

  • Page 35: Using The Features

    WIDE MODE Press to step through the wide screen modes: Wide Zoom, Normal, Full and Zoom. For details, see "Using Wide Screen Mode" on page 47. SONY 8M yg09 scan rapidly through the channels, press and hold down CH+ or CH-.

  • Page 36

    TV Sound (MTS) options: Stereo, Auto SAP, and Mono. GODE Used for programming the remote control to operate non- Sony video equipment. For details, see "Programming Remote Control" on page 68. POWER Press to tum on the DVD/VCR player you have programmed into the remote control.

  • Page 37: Watching The Tv, Using The Features, Using The Freeze Function

    © [] MUTING Press to mute the sound. "MUTING" will appear on the screen and will dim SONY three seconds later. To restore the sound, press again or press VOL +. RM-Yg0g [] FREEZE -- (yellow labeled button) This is useful when you need to copy down information that appears on the TV's screen (see "Using the Freeze Function"...

  • Page 38

    Using the Features [] DISPLAY Press to display the channel number, current time and channel label (if set). I._j t--_ To turn the display off, press DISPLAY again. TV/VIDEO Press repeatedly to scroll through available video inputs: TV, VIDEO VIDEO 2, VIDEO 3, VIDEO 4, VIDEO...

  • Page 39: Watching The Digital Tv, Using The Features

    Using the Features Watching the Digital TV When you have connected the DTV receiver, you can enjoy digital TV programs. This projection TV is capable of receiving the 1080i, 720p, 480p and 480i digital TV formats. : _O_at signal: To view a digital TV program Connect the DTV receiver...

  • Page 40: Using Favorite Channels, Using The Features

    Using the Features Using Favorite Channels The Favorite Channel feature lets you select programs from a list of favorite channels that you preset. To display a list of your favorite channels: Press FAVORITES. The Favorite Channel options appear. --Preview window Move the joystick up or down to highlight the channel you want to...

  • Page 41

    Using the Features Using Twin View Twin View enables you to watch two programs at the same time. You can also change the size of both the left and right pictures. Activating Twin To display twin pictures Pictures Make sure your projection TV is tuned to a working channel.

  • Page 42

    Using the Features...

  • Page 43

    Using the Features Changing the The zoom feature lets you change the size of the left and right pictures. Picture Size To enlarge the the left enlarge right picture picture (reduce reduce the left) the right) Move the Move the joystick right joystick...

  • Page 44: Using The Freeze Function, Using The Features

    Using the Features Using the Freeze Function The FREEZE button allows you to temporarily capture a program's picture. You can use this feature to write down information such as phone numbers, recipes, etc. To use the Freeze function When the program information you want to capture is displayed, press...

  • Page 45: Using Scrolling Channel Index, Using The Features

    Using the Features Using Scrolling Channel Index Scrolling Channel Index allows you to view and select from all receivable channels scrolling on the screen without leaving the current channel. To use the Scrolling Channel Index function Press The current channel will be reduced in size and displayed on the left in...

  • Page 46

    Using the Features Press The selected channel will be enlarged for normal viewing. To cancel Scrolling Channel Index Press again to resume normal viewing.

  • Page 47: Using Wide Screen Mode, Using The Features

    Using the Features Using Wide Screen Mode Wide Screen Mode lets you watch 4:3 normal broadcasts in several Wide Screen modes (16:9 aspect ratio). Press WIDE MODE repeatedly to toggle through the following Wide You can also access the Mode settings. Wide Mode settings in the Wide Zoom enlarges the 4:3 picture,...

  • Page 48: Overview

    Overview Opening and choosing a menu: ®®® Press MENU to display the menu screen. Move the joystick to the desired menu icon and press C) to select Use the joystick to scroll through the features. See the specific menu page for instructions on moving through the menu.

  • Page 49: Using The Video Menu

    Using the Menus Using the Video Menu To select the Video Menu Press MENU. Move the joystick to the Video icon and press C). Mode: Vivid Picture htness C ol_/r Use the joystick to scroll Sharpness Color Tern :Neulral through the features. DRC Mode:_rogressive Press C) to select a feature.

  • Page 50

    Using the Menus Option Description DRC Mode Creates a high-resolution picture with 4x density, for high quality Digital sources (i.e., DVD player, Satellite receiver). Reality Interlaced Recommended for moving pictures. Creation Progressive Recommended for still images and text. CineMotion Recommended for 24 frame-per-second films.

  • Page 51: Using The Audio Menu

    Using the Menus Using the Audio Menu To select the Audio Menu MENU. Press Move the joystick to the Treble Audio icon and press Bass Balance Steady Sound:OFF Use the joystick to scroll Effect:OFF MTS:Stereo through the options. Speaker:ON Audio Out:Fixed Press to select...

  • Page 52

    Using the Menus Option Description Speaker Select to aim on the projection TV speakers. Select to turn off the projection TV speakers listen to the projection TV's sound only through your external audio system speakers. Audio Out Variable The projection TV's speakers are turned off, but Easy control the volume output from your audio system can still...

  • Page 53

    Using the Menus UshTg the Channel Menu To select the Channel Menu MENU. Press Move the joystick to the Favol'lto Channel:Auto Channel icon and press Cable:ON ®. Channel FIx:OFF Auto Channol _kip/Add Channel Label Use the joystick to scroll through the features. Move: "_,k-H- Select: End:...

  • Page 54

    Using the Menus Option Description Channel "Fix" your projection TV's channel to 3 setting Useful when you or 4 and use the cable box, VCR or satellite have a cable box receiver to change channels. Select one of these or satellite settings if you have connected the device to the receiver...

  • Page 55: Using The Wide Menu

    Using the Menus Using the Wide Menu To select the Wide menu Press MENU. Use the joystick to move to the Wide Mode:Full Wide icon and press 4:3Default:Wide Zoom Vertical Center:O Move thejoystick to scroll through thefeatures. PressC)to select a feature. Move: 1_._<- Selsct:®...

  • Page 56

    Using the Menus Option Description Vertical Center Allows you to move the position of the picture up and down in If 4:3 Default is set to the window. (Available only in Wide Zoom and Zoom modes.) anything but Off, the Wide Move the joystick up or down to choose a position and press...

  • Page 57: Using The Timer Menu

    Using the Menus Using the Timer Menu To select the Timer menu "_ Press MENU. Move the joystick to the Timer 1:OFF Timer icon _ and press C)" Timer 2:OFF Current Time Daylight Saving:OFF To set the Current Time Use the joystick to select Move: "t4.-_4- Select:®...

  • Page 58: Using The Setup Menu

    Using the Menus Using the Setup Menu To select the Setup Menu Press MENU. Move the joystick to the Setup PDtsrlta) CorZtrot icon _ and press C). tion V}slon:CC1 Vi_eo Label Language:English Use the joystick to scroll through the features. Press C) to select a feature.

  • Page 59

    Using the Menus Option Description Video Label Allows you to label the audio/video components you connected to the projection TV so you can identify them when using "I'V/ VIDEO. When in the Setup menu's Video Label feature, use the joystick to highlight an input to label, then press (_) to select it, Use the joystick...

  • Page 60

    Using the Menus Using the Parent The Parent menu allows you to set up the TV to block programs according Menu their content and rating levels. These ratings are assigned by a federal rating board. Not all programs rated. Using the Parental Lock blocks programs with a specific rating, but it does not block an entire channel.

  • Page 61

    Using the Menus Make sure that "Country" is selected, and press C). Country:U.S.A. PerentSlLoek:OFF Change Password Move the joystick up or down to select U.S.A. or Canada according the country you reside in, and press _). U.S.A. _llr enllll LOCk;OFF sdll {:hinge PllSWOrd...

  • Page 62

    Using the Menus The Parent menu includes the following options. Option ..Description ......Ik_ If you are not familiar with the Parental Parental Lock Parental lock is Off. NO programs are blocked Guideline rating system, Turn ratings from viewing. you should select Child, offand...

  • Page 63

    Using the Menus Using Custom If you want to select the ratings to be blocked from Custom, follow the Rating Options procedure below. Perform the steps 1 to 8 in "To select the rating" on page 60 to display the Parental Lock options. Move the joystick up or down to select "Custom,"...

  • Page 64

    Using the Menus Move the joystick left, then down, to select "TV Rating" or "Program," and press Custom Ratings Movie Ratings TV Rattn Unrated:_llow Press to set rating M eve: t J.-t,€- Select: End: The "TV Rating" setting menu appears. Rating Content TV-Y:...

  • Page 65

    Using the Menus Move the joystick left or right to select the extender to be viewed, and press C)- Rllin o Gontent TV-Y TV-Y7 FV:- TV-G: • TV-PG:d5 L:d) $:- TV-14 L:d5 S: B V:lb TV-M#.:t • S;& Prusl _) to block rating Movm: I, J,._, Seieot: End:_...

  • Page 66

    Using the Menus US custom rating options If you selected U.S.A. as the country of residence on page 60, the Custom Rating Menu includes the following options. (If you selected Canada, page 67.) Option Description All children and General Audience. Movie Rating []To ensure...

  • Page 67

    Using the Menus Canadian custom rating options If you selected Canada as the country of residence on page 60, the Custom Rating Menu includes the following options. (If you selected U.S.A., page 66.) Option Description English Rating € All children. Children 8 years and older.

  • Page 68

    Programming the Remote Control The remote control is preset to operate Sony brand video equipment. Sony Switch Position Programmable Equipment on Remote Control Code Number Beta, ED Beta VCRs AV 1 8 mm VCR VHS VCR DVD Player If you have video equipment...

  • Page 69

    In some rare cases, you may not be able to operate your component with the Sony remote control. In this case, use the component's own remote control unit.

  • Page 70

    Code Manufacturer Code Minolta 305, 304 Wards 327, 328, 335, VCRs 331,332 Mitsubishi/ 32313241325, Manufacturer Code Yamaha 314, 330, 3361 Sony Multitech 325,338, Admiral Zenith 314, 336, 337 (M. Ward) Olympic 309, 308 Aiwa 3381344 DVD Players Optimus Manufacturer Code...

  • Page 71

    Other Information Operating Other Components with Your Projection TV Remote Control Operating a VCR Open the panel and move the slide switch to the AV input you coded for this device. To Do This ... Press Turn on/off green POWER button (inside the panel) Change channels CH +/-...

  • Page 72

    Other Information Operating a Cable To Do This ... Press Turn on/off SAT/CABLE (POWER) select Cable Box SAT/CABLE (FUNCTION) Select a channel 0-9 buttonsl ENTER Change channels CH +/- ..Back to previous channel JUMP Operating a Satellite TO DO This .'. Press ....

  • Page 73: Troubleshooting

    60). If your projection TV does not turn on, and a red light keeps flashing, your projection TV may need service. Call your local Sony Service Center. Remote control Batteries could be weak. Replace the batteries. does not operate Press'IV...

  • Page 74

    Other Information Problem Possible Remedies Projection TV is fixed to one Use Auto Program in the Channel menu to add receivable channels that are not channel presently in TV memory (see page 54). Check your Channel Fix settings (see page 54). Double images or ghosts Use a highly directional outdoor antenna Or a cable (when the problem is caused by...

  • Page 75

    Other Information Problem ..Possible Remedies ..............You get the same program in the 21 Both may be set to the same channel. Try changing channels in either the main picture or the window picture. window picture as in the main You may be running all your channels through a cable box.

  • Page 76: Specifications

    Other Information Specifications Projection System 3 picture tubes, 3 lenses, horizontal in-line system Picture Tube 7-inch high-brightness monochrome tubes (6.3 raster size), with optical coupling and liquid cooling system Projection Lenses High performance, large diameter hybrid lens FI. 1 Antenna 75 ohm external terminal for VHF/UHF Television...

  • Page 77

    Other Information Mass i67 ib 9oz ('16 kg) iKP_5iWS500) ............. 196 lb 3oz (89 kg) (KP-57WS500) 275 lb 8 oz ( 125 kg) (KP-65WS500) Power consumption ..In Use 230 W Under in Standby Supplied Accessories Remote control RM-Y909 AA (R6) Batteries 2 supplied for remote control Optional...

  • Page 78: Index

    Index Connecting Audio receiver Activating a Twin View screen 41 AV receiver Adding channels to the channel list 54 Cable box 16--21 Adjusting audio, Steady Sound 51 Cable or antenna ANT button 34 Camcorder Antenna, connecting Digital TV Receiver Audio menu 48, 51 DVD player 26, 27 Audio receiver, connecting...

  • Page 79

    setting up 53 using 40 Parental control, described FAVORITES button Password, changing Features PIC MODE button Flash Focus Picture contrast, adjusting described Picture size, adjusting in Twin View performing POWER button FREEZE button POWER buttons (GREEN) Freeze, using 37, 44 Presetting channels 32, 54...

  • Page 80

    Surround sound SYSTEM button Time set current set daylight saving Timer menu 48, 57 Timer setting Treble, adjusting Troubleshooting 73-75 TV function button TV power button TV/VIDEO button Twin View activating a picture 41 described using 41 connecting two, for tape editing using with TV remote control with cable box, connecting with cable, connecting...

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: