Download Print this page

Advertisement

Quick Links

END USER WARRANTY
EGO SYSTEMS, INC. warrants the return policy to its original purchaser as follows: All EGO
SYSTEMS INC.'s products, under normal use, will be free from fault as long as the purchaser
owns this product for a period of twelve (12) months from the date of purchase
.
EGO SYSTEMS INC. will, at its sole option, repair or replace a product, which is found to be
defective. This warranty shall be invalid if, in the sole opinion of EGO SYSTEMS INC., a product
failure is the result of misuse, abuse, modification, or misapplication. Except as expressly
provided above, EGO SYSTEMS INC. products are provided, 'as is' without any kind of warranty.
No claim is made for merchantability or fitness for any purpose. In no event will EGO SYSTEMS
INC. be liable for any direct, indirect, consequential, or incidental damages arising out of use
of the product.
The purchaser must contact EGO SYSTEMS INC. or its regional representative to receive prior
approval before returning a faulty unit.
To obtain warranty service, the buyer or his authorized dealer must send an email to
before returning the product. EGO SYSTEMS INC. will then issue an
techsupport@audiotrak.net
authorization number.
All such returns must be shipped to EGO SYSTEMS INC. headquarters in Seoul, Korea or the U.S,
packaged in the original or equivalent protective packaging material (rack, PCI card, power
cables, connection cables), with freight prepaid and adequate insurance. Any shipments
without freight prepaid will not be accepted. If the returned product is deemed to be defective,
the repaired or replacement product will be returned at no extra charge via the carrier chosen
by EGO SYSTEMS INC.
Trademarks
AUDIOTRAK and OPTOPlay are trademarks of EGO SYSTEMS Inc. Windows is a trademark of Microsoft Corporation. Other
product and brand names are trademarks or registered trademarks of their respective companies.
Radio Frequency Interference and COMPATIBILITY
NOTE: This equipment has been tested and found to comply with the limits for EN55022 Class A:1998+A1:2001,
EN55024:1998 of CE Test Specifications. This equipment generates, uses, and can radiate radio frequency energy. If not
installed and used in accordance with the instruction, it may cause interference to radio communications. This device
also complies with Part 15 of class A of the FCC Rules. Operation is subject to the following two conditions: This device
may not cause harmful interference, and must accept any interference received, including interference that may cause
undesired operation.
Correspondence
For technical support inquiries, contact your nearest dealer or EGO SYSTEMS directly at:
Ego Systems Inc.
3003N. First St., Suite 303,
San Jose, CA 95134, USA
Website: www.audiotrak.net
E-mail: sales@audiotrak.net
Technical Support (English only)
techsupport@audiotrak.net
All features and specifications subject to change without notice.
AUDIOTRAK OPTOPlay User's Guide
- i-

Advertisement

loading

Summary of Contents for Audiotrak AUDIOTRAK OPTOPlay

  • Page 1 END USER WARRANTY EGO SYSTEMS, INC. warrants the return policy to its original purchaser as follows: All EGO SYSTEMS INC.’s products, under normal use, will be free from fault as long as the purchaser owns this product for a period of twelve (12) months from the date of purchase EGO SYSTEMS INC.
  • Page 2: Table Of Contents

    ONTENTS Overview ..................1 Installation..................3 Minimum System Requirements................3 Hardware Installation ..................3 Software Installation ..................3 Configuring WinDVD4..............9 Specifications ................11 AUDIOTRAK OPTOPlay User’s Guide - ii-...
  • Page 3: Overview

    VERVIEW OPTOPlay is the unique, yet simplistic USB device for producing high-fidelity analog and digital audio output. Simply plug OPTOPlay into your PC’s USB port and instantly listen to 24-bit 96kHz professional quality audio. OPTOPlay delivers the stunning sounds of Dolby Headphone Technology, a unique signal- processing system that enables your stereo headphones to portray the sound of a five-speaker, surround-sound playback system.
  • Page 4 AUDIOTRAK OPTOPlay User’s Guide - 2-...
  • Page 5: Installation

    NSTALLATION One of many benefits of a USB device is the ease of installation. Simply plug OPTOPlay into a USB port, and the device is installed. INIMUM YSTEM EQUIREMENTS Intel Celeron 366 MHz CPU or equivalent AMD CPU Windows 98SE, ME, 2000, XP operating system One available USB port 64MB of RAM ARDWARE...
  • Page 6 1. Windows will automatically detect that a new hardware has been connected and the “Add New Hardware Wizard” will appear. Click ‘Next’. 2. Choose “Search for the best drivers…” AUDIOTRAK OPTOPlay User’s Guide - 4-...
  • Page 7 3. Choose “specify a location” and specify the location of the Windows 98 CD or files. If you are connected to the Internet, you may also choose “Microsoft Windows Update”. 4. The window will display the ‘Windows driver file search for the device’ and ‘Location of driver’.
  • Page 8 5. When “USB composite device” appears, click “Finish”. After the USB Composite Device is installed, the installation will continue with the installation of the USB Audio Device. 6. The USB Audio Device Window will appear. Just click “Next”. And choose “Search for the best driver…”...
  • Page 9 7. Click “Next”. 8. When “USB Audio device” appears, click “Finish”. AUDIOTRAK OPTOPlay User’s Guide - 7-...
  • Page 10 9. To confirm the installation of the OPTOPlay, go to ‘Start->Settings-> Control Panel -> System -> Device Manager’. Confirm that the “USB Audio Device” is listed under ‘Sound, video and game controllers’ and that the “USB Composite Device” is listed under ‘Universal Serial Bus controllers’.
  • Page 11: Configuring Windvd4

    DVD4 ONFIGURING WinDVD 4 must be installed to enjoy all the benefits of OPTOPlay. Locate the WinDVD folder on the AUDIOTRAK Installation CD, and click on the setup.exe file to complete the installation. Once WinDVD 4 is installed, open the application and complete the following steps to configure WinDVD 4 for operation with OPTOPlay.
  • Page 12 A 5.1 surround sound digital output also can be achieved by using OPTOPlay’s Optical connector to pass thru Dolby digital 5.1 with including WinDVD4. Select Digital ( S/PDIF) on Audio tab of WinDVD for Dolby Digital Pass Thru Connection to A External Decoder AUDIOTRAK OPTOPlay User’s Guide - 10-...
  • Page 13: Specifications

    PECIFICATIONS Interface: USB Spec Ver1.1, USB Audio Class Spec Ver1.0 Output: Analog & Digital Audio 2-channel output Output Format: Analog Line or Headphone Output SPDIF Optical Output (TOS-Link) Sample Rate: 32 kHz, 44.1 kHz, 48 kHz, 64 kHz, 88.2 kHz, 96 kHz * Digital output on Mac OS X is 48kHz Bits Resolution: 16 Bits or 24 Bits...