Installing Memory Card; Transferring Files - Ematic Tablet Manual

Bottom View
Side View
n
m
o
k
l
Charging Battery
The device has a built-in rechargeable battery. No extra battery installation is
required. Just charge the device when it indicates low battery.
To charge the battery, connect the device to any standard wall outlet through
the AC adaptor via the DC-IN port. It takes about 5 hours to fully charge the
battery.
Note:
a. You are strongly recommended to charge the battery immediately when the
device indicates the battery is lower than 15%!
b. You can operate the device even when it is being charged. But for extending the battery
life, you are suggested NOT to use the device when it is in charge.
c. You are recommended to charge the battery when you use the device for the first time.
d. For maximum performance, lithium-ion batteries need to be used often. If you don't use
the device often, be sure to recharge the battery at least once per month.
Installing a Memory Card
In addition to the built-in memory, your Internet Tablet features a memory card
slot to extend its memory space. You can read e-book, music, image or video
files from a MicroSD card directly.
To install a memory card, find the card slot at the bottom of the machine, and
then insert a MicroSD card into the slot with the correct direction.
To access the memory card, enter the Explorer mode and then select the "SD
Card" directory.

Transferring Files

Before reading or playing files, make sure your Internet Tablet's internal memory
or the external memory card has media files. If not, transfer files from computer
j. Micro-SD Card Slot
j
k. Earphone Jack
l. DC-IN Port: connect to any
standard electronic outlet
through AC adaptor.
m. Built-in microphone
n. Reset pin hole
o. Desktop Stand/ 3G Card
Slot (optional)
6