Samsung UN40F6300 E-Manual page 55

Anynet+ (__DMI-CEC/ Device Menu
Once the TV has switched over to the selected device, you can access the device's menu using
the TV's remote control. Select the Virtual Remote panel's TOOLS button to display the list. Select
Anynet+ (HDM_-CEC} from the list. The following Anynet+ device options will appear. The displayed
Anynet+ device options may vary depending on the external device.
o View TV: Select this to switch the remote control mode to the TV.
Device List: Displays a list of Anynet+ (HDMI-CEC) devices connected to the TV. To change a
device, select a desired device in the list.
(Connected Device) MENU: Display the menu of the connected device. If the target device is a
DVD player, the DVD menu is shown.
(Connected Device) Tools: Display a list of frequently-used functions that are available for the
device. If the target device is a DVD player, the DVD playback menu is shown. Some external
devices may not support this option.
(Connected Device) Title Menu: Display the connected device's title menu. If the target device is
a DVD player, the DVD title menu is shown. Some external devices may not support this option.
Receiver: Listen to audio from the connected external device through an AV receiver, such as a
home theater system, instead of the TV speakers. This option is only available when there is an
AV receiver connected to the TV. The menu may not be shown with receivers that support audio
only.
ARC enables digital sound to be output using just an HDMI cable. However, ARC is only available with
AV receivers that support ARC.
To use ARC, enable it from the Anynet+ (HDMI-CEC) device menu Receiver.