Samsung UN40F6300 E-Manual page 79

Activating 3D Mode
Screen Menu > Picture > 3D > 3D Mode
Choose a 3D mode according to the input signal. Available 3D modes may vary depending on the
input signal. Some 3D contents may differ prefered 3D mode. In this case, change the desired 3D
mode for watching. Select a 3D mode from the available 3D modes depending on the input signal.
Available 3D modes may vary depending on the input signal.
o _ Off: Deactivates 3D viewing.
@
H
O
O
O
O
O
O
O
Normal: Converts normal images to 3D images. Some formats do not support this mode.
L/R: Splits a single image into left and right overlapping images to create the 3D effect.
T/B: Splits a single image into top and bottom overlapping images to create the 3D effect.
Horizontal Line: Switches between left and right images one horizontal line at a time.
Vertical Line: Switches between left and right images one vertical line at a time.
Pixel: Switches between left and right images one pixel at a time.
Frame: Switches between left and right images one frame at a time.
(Horizontal Line), _ (Vertica Line), and _ (Pixel) can only be seected when the computer's reso ution
is set to 1920x1080 or the computer is connected to the TV via an HDMI-DVl cable,
_ (Frame) can only be se ected when the computer's reso ution is set to 1920x1080 and the frequency to
60Hz,
Resolutions supported by the TV may vary, depending on the 3D mode. For details, see "Supported 3D
Resolutions".
Setting 3D Effects
There are several adjustments that can be made to make 3D content more enjoyable.
3D Perspective: Adjusts the 3D perspective.
O
O
O
O
Depth: Adjusts the 3D depth. This option cannot be used if 3D mode is set to _ (L/R) or
(TJB)
L/R Change: Swaps the left and right pictures.
3D _ 2D: Converts 3D images to normal images. This function is not available if 3D mode is set
to _ (Normal) or _ (Off).
3D Auto View: Setting 3D Auto View to On switches the TV to 3D automatically. Setting 3D Auto
View to Message Notice brings up a message screen when the TV receives a 3D signal. If some
applications are running, The TV can not switch 3D. In this case, close the application and then
watch the 3D. This mode is available for LED TVs only,
o 3D Light control: Adjust the brightness of 3D images. If the screen is too dark, select High. This
mode is available for LED TVs only.