Auto Program - Samsung UN40F6300 E-Manual

Programming
Scan and index available channels.
The dispIayed image may differ depending on the modet,
You can also remove channels from the index, restore removed channels and designate favorite
channels for a more convenient TV viewing experience. Programming is not necessary if you are
connected to a cable or satellite receiver.
Auto Program
Screen Menu > Broadcasting > Auto Program
Automatically scans and indexes all channels received through the TV's antenna input connector.
To start, navigate to Broadcasting and select Auto Program.
2. Select Start when prompted with a message. This initiates the Auto Program function. The
process can take up to 30 minutes to complete. If Starting the Auto Program function when there
is an existing index of channels overwrites the previous index.
Remove Scrambled Channels
Screen Menu > Broadcasting > Channel Settings > Clear Scrambled Channel
Remove scrambled channels (ex: pay-per-view channels) from channel list. To remove scrambled
channels, run this function. This function is enabled only for cable TVs when at least one digital
channel is available.