Setting The Jpeg Interval; Program Playback (Cd) - RCA L26HD35D Owner's Manual

Select Files
The file type to make it display in the file browser can
be chosen.
1
Press 41/=,-to select "Select Files" at right column
in the file browser.
• Press ENTER, then press •/v to select file
type from the list (Music or Picture).
A
Press ENTER to add/remove check mark.
Checked file type will be displayed in the file browser.
Press RETURN to save the setting.
Setting the JPEG
interval
You can continuously play back all JPEG files
automatically.
1
Press SETUP/TV MENU in the stop mode.
Press • or • to select _ option, then press _l/_,-
or ENTER.
2
3
4
Press • or • to select '3PEG Interval", then press
_,- or ENTER.
Press • or • to select your desired time, then
press ENTER.
TV Screen : 16:9
Display : On
Picture Mode :Auto
Off:
Plays back one file at a time.
5 Seconds:
Plays back images in the form of a slide show at 5
second intervals.
10 Seconds:
Plays back images in the form of a slide show at
10 second intervals.
15 Seconds:
Plays back images in the form of a slide show in
15 second intervals.
Press SETUP/TV MENU to remove the menu
screen.
Program playback (CD)
You can arrange the order of tracks on the disc.
1
In the file browser, press •/•/,/D, to select"Edit
Mode", then press ENTER.
When "Edit Mode" is highlighted, you can mark
the files which you want to add into Program list.
2
Press •/•/_1/I,- to select the file you want to add
into the program list.
Press ENTER. Selected file was marked.
Repeat this procedure to select the other files.
3
Press •/•/_I/D,- to select "Add To Program".
Then press ENTER. All marked files are added
into the program list.
When you finish storing the files you want into the
Program list, select "Edit Mode" again and press
ENTER to release edit mode.
4
Press •/• to select"Program View", then
press ENTER. Program View shows only the
programmed files that you have added in Step 2.
Browser View Program View
,_ In the Program View, press PLAY. The files start
to playback in programmed order that were
added by you.
To remove file from program list in stop mode
In the Edit Mode, switch to Program View. Select the
files you want to remove, then press ENTER. Select
"Clear Program" and press ENTER. Marked file is
removed from program list.
NOTE:
• The program is cancelled when you eject the disc
or turn the power off.
29