Recording
• Setting
up [%_]
(AF
Tracking)
Bring
the subject
to the
AF tracking
frame,
and
press
T.
(_ AF tracking
frame
• AF area will be displayed
in yellow
when a subject
is recognized,
and
focus will automatically
adjust continuously
following
the subject's
movement
(Dynamic
tracking).
• AF tracking
is turned off when
•
is pressed
again.
• Dynamic
tracking
function
may fail to lock, lose the subject
in AF tracking,
or track different
subject
depending
on the recording
conditions
such as the ones below.
-When
the subject
is too small
-When
the recording
location
is too dark or bright
-When
the subject
is moving
too fast
-When
the background
has the same or similar color to the subject
-When
jitter
is occurring
-When
using the zoom
• If it fails to lock, AF area will flash in red, and disappear.
Press
•
again.
• AF Tracking
will not operate
when the subject
is not specified,
the subject is lost, or has failed
to be tracked.
The picture will be taken with [E_]] in [AF Mode]
in that case.
• It cannot be set to [r_]
in the following
conditions.
- In [Panorama
Assist],
[Pin Hole],
[Film Grain], or [High Dynamic]
in Scene Mode
- In [B/W],
[SEPIA],
[COOL],
or [WARM]
in [Color Mode]
-77-