Set-Up; Shear Pins - Craftsman 247.886912 Operator's Manual

10. Checkthat all cables are properlyroutedthroughthecable guide "_
on theengine.See Figure10.
NOTE:If the chute controlis not assembledcorrectlyit will not move
freelynor will it movefully to the rightand left.
11. Theextensioncord forthe electricstarteris fastenedwith a
cabletie to the rearof the auger housingfor shippingpurposes.
Cutthe cabletie and removecord beforeoperatingthe unit.
SET-UP
Shear Pins
Holesare locatedin the handlepanelfor convenientshearpin storage.
See Figure11.Referto the Operationsectionfor moreinformation
regardingshearpin replacement.
/
i
/
/
I
Figure10
f
Figure11
J
11