Watch Tv - Philips 42PFL5008G User Manual

Watch TV

Switch TV on or off
Switch the TV on
•
Connect the TV to the mains outlet
and switch on the main power.
•
If the TV is not switched on, the
standby LED remains off.
Press on the TV.
•
If the standby LED is lit, press
remote control.
Note: There is a short delay before the TV
responds.
Tip: If you cannot find your remote control
and want to switch on the TV from standby,
press any key on the TV.
Switch TV to standby
Press on the remote control.
The standby LED on the TV switches to red.
Switch off the TV
Press on the TV.
The standby LED switches to off.
Note: Though your TV consumes very little
energy when it is in standby or switched off,
it does use some energy. If you are not going
to use the TV for an extended period of
time, disconnect the TV from the mains plug.
Automatic switch off
You can save energy with this TV's energy
efficiency settings, which are enabled by
default. If there is no user interaction (such
as pressing a remote control button or a
control on the TV) for four hours, the TV
will automatically switch to standby.
To disable automatic switch off
1. While you watch TV, press the Green
button on the remote control.
2. Select [Auto switch off], then press OK.
3. Use the Navigation buttons to make a
selection, then press OK.
Adjust TV volume
on the
Increase or decrease the TV volume
•
•
Mute or restore the TV volume
•
•
Adjust headphone volume
1. Press
2. Select [Setup] > [TV settings] > [Sound]
> [Headphone volume], then press OK.
3. Select a level.
Press +/- on the remote control.
Press +/- on the TV.
Press on the remote control to
mute the volume.
Press again to restore the volume.
.
EN 13