Excell High Precesion Counting Scale User Manual

High precision counting scale

Advertisement

EXCELL PRECISION CO., LTD
.
© Excell Precision Limited 2006. All rights reserved Worldwide.
The information contained herein is the property of Excell Precision Limited and is supplied
without liability for errors or omissions. No part may be reproduced or used except as
authorised by contract or other written permission.
The copyright and the foregoing
restriction on reproduction and use extend to all media in which the information may be
embodied.
ZSME200000007

Advertisement

Table of Contents
loading

Summary of Contents for Excell High Precesion Counting Scale

  • Page 1 EXCELL PRECISION CO., LTD © Excell Precision Limited 2006. All rights reserved Worldwide. The information contained herein is the property of Excell Precision Limited and is supplied without liability for errors or omissions. No part may be reproduced or used except as authorised by contract or other written permission.
  • Page 3: Table Of Contents

    EXCELL PRECISION CO., LTD BEFORE USING THE SCALE ... 2 INSTRUCTIONS FOR USE ... 2 PREPARING TO USE THE SCALE ... 2 CHAPTER 1 INTRODUCTION... 3 1-1 FEATURES... 3 1-2 EXPLANATION OF DISPLAY ... 4 1-3 KEY FUNCTION ... 6 1-4 POWER SUPPLY ...
  • Page 4: Before Using The Scale

    4. The load placed on the weigh pan must not exceed the maximum weighing capacity of the scale. 5. If the scale is not going to be used for some time, please clean it and store it in a plastic bag in dry conditions. A desiccant sachet may be included to prevent moisture build up.
  • Page 5: Chapter 1 Introduction

    Data accumulations (weight and quantity) Auto average unit weight, 10 preset unit weight Weight and quantity over-limit warning Standby function to keep the scale more stable and accurate Auto temperature linearity compensation 10. Counting by sample or unit weight setting 11.
  • Page 6: Explanation Of Display

    To indicate the weight of objects on the platter or the accumulation of total weight , the utmost left digit can be a negative sign “-” . 2. ¨ SCALE WITH TWO WEIGHING UNITS (lb & kg) UNIT WEIGHT (PER 1000): (5 digits) To indicate the unit weight ´1000pcs of objects, the decimal point can be floating.
  • Page 7 “ 3 ” disappear. : If the unit weight of the object is too small, the sign “ 3 ” will appear. Under this status, the scale can still work but may result a deviation of the accuracy.
  • Page 8: Key Function

    8. SCALE WITH TWO WEIGHING UNITS: lb/kg : Press this key to choose the weighing units. SCALE WITH ONE WEIGHING UNIT ( “kg” or “lb” only ): U.W. : Press this key to preset the unit weight of sample.
  • Page 9 EXCELL PRECISION CO., LTD ..: Press this key, the total count including the previous calculation will be stored in the memory. : For clearing the stored memory.
  • Page 10: Power Supply

    WEIGHT display, the battery needs recharging. When the low battery sign is shown, if the scale can ’t be charged in time, the power will be auto-cut after 20~30 Hours operation and enter the protection mode for the battery. The scale should be...
  • Page 11: Chapter 2 Operation

    “standby” key. If you don’t use the scale for a long period of time, you’d better to turn the main power off by the ON / OFF switch. key until display appears “...
  • Page 12: Scale With Two Weighing Units

    EXCELL PRECISION CO., LTD 2-3 SCALE WITH TWO WEIGHING UNITS UNIT SELECTION: Press lb/kg to choose the weighing unit and the display will be shown “kg” or “lb”. ¨ The unit status will be memorized. 2-4 SCALE WITH ONE WEIGHING UNIT [[[ “kg”...
  • Page 13 « When scale with two weighing units, the number of “UNIT WEIGHT (PER1000)” display is unit weight ´1000pcs of the object on platter. « When scale with one weighing unit, the number of “UNIT WEIGHT” display is unit weight of the object on platter.
  • Page 14: Counting

    ..the weight of the sample (4) When the scale is stable, it is finished for sampling and enters in the counting mode. the weight of the sample (if scale with two weighing units, the display will show 1000 pcs ’ weight) (if scale with one weighing unit, the display will show “unit weight”)
  • Page 15 If sample weight less than 20 divisions. Standard Counting Scale: If sample weight less than 40 divisions. Such condition as above-mentioned, the scale still works, but may result in a deviation of the accuracy. Stable unit weight ´ 1000 pcs Stable unit weight ´...
  • Page 16: Deduction Of Package Weight

    A. The weight of the container is unknown (Tare): (1) Put the container on the platter. the weight of the container (2) Press key. - - - - - (3) When the scale is stable and enters the counting mode. ®0¬ - - - - - - Stable...
  • Page 17 EXCELL PRECISION CO., LTD B. The weight of the container is known (Pre-Tare): Please refer to page 23 “B. Set the form of “pre-tare” function” first and pre-set the function to “0” or “1”. B-1) Setting “0” for the form of “pre-tare” : (1) There is no object on the platter.
  • Page 18 (if scale with two weighing units, the display will show 1000 pcs ’ weight) (if scale with one weighing unit, the display will show “unit weight”) When no load on the scale and the WEIGHT display shows the negative value of the container’s weight, press “...
  • Page 19: Accumulation

    (1) Put object on the platter. the present weight on platter (if scale with two weighing units, the display will show 1000 pcs ’ weight) (if scale with one weighing unit, the display will show “unit weight”) . . .
  • Page 20: Quantity Check-Weighing

    EXCELL PRECISION CO., LTD 2-8 QUANTITY CHECK-WEIGHING If the quantity on the scale is over the preset quantity, the beep will sound and the UNIT WEIGHT (PER 1000) display will show SETTING MAXIMUM LIMIT OF QUANTITY: (1) Press key (when the scale is loaded or unload).
  • Page 21: Check-Weighing

    EXCELL PRECISION CO., LTD 2-9 CHECK-WEIGHING If the weight on the platter is over the preset weight, the beep will sound and the UNIT WEIGHT (PER 1000) display will show SETTING MAXIMUM LIMIT OF WEIGHT: (1) Press key (when the scale is loaded or unload).
  • Page 22: Zero Function

    To initiate the backlight function: ¨ Press ®0¬ followed by 5 to set up the Auto-Backlight. When the scale is loaded (must be over 10d) or pressing any key of keyboard, the backlight will be on. The backlight will be off automatically 5 seconds after the displays return to zero.
  • Page 23: Auto Calibration

    (2) Put the mass (full capacity) on the platter. The scale will be calibrated automatically when it is stable. While the scale is reverting to zero, please take the mass away from the platter.
  • Page 24: Chapter 3 User Interface Setting

    EXCELL PRECISION CO., LTD CHAPTER 3 USER INTERFACE SETTING There are 6 kinds of interface modes for user to free-setting. A. Set the appearance of (1) Press ®0¬ key. - - - - - ®0¬ (2) Press 1 to enter the setting mode.
  • Page 25 Please choose 0 or 1 by pressing 0 or 1 key The tare value can not be preset when the scale is loaded. The tare value can be preset when the scale is loaded or unload. Factory setting Þ 1 If to abandon and escape from the setting mode, press .
  • Page 26 EXCELL PRECISION CO., LTD C. Set the form of function (1) Press ®0¬ key. - - - - - - - - - - - ®0¬ Stable (2) Press 1 to enter the setting mode. (3) Press 3 key. Function reservation!
  • Page 27 EXCELL PRECISION CO., LTD D. Set the action of ..(1) Press ®0¬ key. - - - - - ®0¬ (2) Press 1 to enter the setting mode. (3) Press 4 key. Please choose 0 or 1 by pressing 0 or 1 key .
  • Page 28 EXCELL PRECISION CO., LTD E. Set the next action of (1) Press ®0¬ key. - - - - - ®0¬ (2) Press 1 to enter the setting mode. (3) Press 5 key. Please choose 0 or 1 by pressing 0 or 1 key .
  • Page 29: Zero Display Range

    The speed of sampling: The speed setting is from 01~15. The smaller number you set, the slower speed for sampling is. The slower speed you set, the scale will show more accurate. If faster speed you set, the scale will sacrifice the accuracy.
  • Page 30: Appendix Specification Table

    EXCELL PRECISION CO., LTD APPENDIX SPECIFICATION TABLE Standard counting scale: External resolution: 1/6000 CAPACITY 300 g 600 g 1.2 kg 3 kg 6 kg 12 kg 30 kg 60 kg 120 kg 300 kg 600 kg High precision counting scale:...
  • Page 31 EXCELL PRECISION CO., LTD External resolution: 1/30000 CAPACITY 300 g 600 g 3 kg 6 kg 30 kg 60 kg 300 kg 600 kg DIVISION MINIMUM RESOLUTION 0.01 g 0.02 g 0.1 g 0.2 g 10 g 20 g 0.0005 g 0.001 g...

Table of Contents