Frigidaire GLEH1642DS0 Operating Instructions

Laundry Center Dryer Operating Instructions
©_
A_rO_11¢
OFF
Before Operating Your Dryer
Read your Owner's Guide. It has important
safety and warranty information. It also has many
suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your owner's guide
before operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's
Guide. It explains these operating steps in detail.
I. Prepare items for drying.
2. Check that tint screen is clean and in place.
3. Load the dryer. If desired, add a dryer fabric
softener sheet.
4. Close the dryer door.
.5. Set Drying Temperatures control.
6. Turn cycle selector clockwise to desired
setting.
7. Start dryer. Turn the Turn to Start control
clockwise to ON. Hold for 1_2 seconds and
release.
8. A signal wilt sound when the cycle ends.
9. Remove items immediately and hang or
fold.
10. Clean lint screen after every load.
Temperature Selection
Always follow directions on fabric care
labels.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured, rubber-
like materials. Use Air Fluff cycle only.
The REGULAR/WHITES-H_GH HEA T, PERM PRESS/
COLORS-MEDIUM HEA T, and KNITS-MEDIUM
LOW HEA Tand DEMCA TES-LOW HEA T
temperature settings may be used with any cycle
setting.
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to
tumble for 5-!0 minutes. This reduces wrinkling
and makes items easier to handle during unloading.
Drying time varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation and
electrical voltage or gas pressure can also affect
drying time.
Printed in U.S.A. P/N 134396400A(0403)