Hoover SteamVac V2 User Manual
Easy to use deep cleaner
Hide thumbs
Also See for SteamVac V2:
- Owner's manual (17 pages) ,
- Owner's manual (17 pages) ,
- Owner's manual (18 pages)
Related Manuals for Hoover SteamVac V2
Summary of Contents for Hoover SteamVac V2
- Page 1 Deep Cleaner The Easy to Use Deep Cleaner SteamVac™ V2™ Deep Cleaner cleans carpet fibers by applying hot tap water and cleaning solution. www.hoover.com ™ ™ ® ENGLISH pp. 1-17 ESPAÑOL pág. 18-27 FRANÇAIS p. 28-37...
-
Page 2: Grounding Instructions
• Do not use with damaged cord or plug. If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a Hoover Factory Service Center or Authorized Hoover Warranty Service Dealer. • Close supervision is necessary when any appliance is used by or near children. -
Page 3: Table Of Contents
Thank you for choosing a HOOVER product. If you need any assistance: Visit our website at www.hoover.com. Click on the “Service” button to find the service outlet nearest you OR Call 1-800-944-9200 for an automated referral of service outlet locations (U.S. -
Page 4: Assembling Deep Cleaner
The assembled cleaner will look like this drawing. Model with SpinScrub™ hand tool is shown. With cord hook (D) to back of deep cleaner, push upper handle down onto lower handle. Attach hose/cord hook Insert tabs on hook into slots on back of cleaner. -
Page 5: Storing Hose And Tools
Rotate top of caddy toward cleaner handle. Slide caddy down so notch (G) on caddy rests in hook (H) on cleaner. 1-12 Press hose into opposite side of caddy. Loop hose at bottom of cleaner and press into top of hook (K). 1-15 Insert top of bare floor tool (available at additional cost if not included with your... - Page 6 1-18 Pull tool down and outward. To reposition the tool, reverse this proce- dure. 1-19 How to reattach tool cover The tool cover is designed with a break- away feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage area.
-
Page 7: How To Use
2. How to use Deep Cleaner Description ON/OFF switch To turn cleaner ON, push switch down. To turn cleaner OFF, push switch up. The assembled deep cleaner will look like the drawing. Model with SpinScrub™ hand tool is shown. 1. Hand grip 2. -
Page 8: Filling The Clean Water Tank
Check clean water tank also; it may need to be refilled. Do not use without float and float retainer in place. If broken or dis- lodged, take to an Authorized Hoover Service Center or Dealer for repair. The tanks Clean water tank... -
Page 9: Emptying The Recovery Tank
Carry tank to a sink. Turn tank cap counterclockwise and remove cap. 2-14 Fill container (16 oz.) with HOOVER Carpet/Upholstery Detergent or HOOVER Bare Floor Cleaner. Do not use Bare Floor Cleaner on carpet or upholstery. Do not use any type of wax with your ‘SteamVac’... -
Page 10: How To Clean
3. How to clean Before you begin cleaning a. Vacuum thoroughly - For carpet, use a HOOVER vacuum cleaner with an agitator for best results. Vacuum uphol- stery with a vacuum cleaner with clean- ing tool attachments. Use a crevice tool to reach into tufts and folds. -
Page 11: Cleaning Carpet
9. 1. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 2. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15. 3. Turn brushes ON or OFF as desired. -
Page 12: Cleaning Bare Floors
1. Fill clean water tank according to instructions for Figs. 2-9 to 2-15. 2. Fill detergent container with HOOVER Bare Floor Cleaner according to instruc- tions for Figs. 2-13 to 2-15. 3. Turn brushes ON for scrubbing or OFF if scrubbing is not desired. -
Page 13: Select Tool
Select tool Your model includes some combination of the following tools, but may not include them all. 3-13 After using tool Drain suction hose by turning deep cleaner ON and holding nozzle up for several minutes. Do not press trigger. Unplug deep cleaner from electrical outlet. -
Page 14: Cleaning Carpeted Stairs
2. Place handle in upright position. 3. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 4. Fill detergent container with HOOVER Bare Floor Cleaner according to instruc- tions for Figs. 2-13 to 2-15. 5. Attach tool to end of hose. -
Page 15: Cleaning Upholstery
3. Fill clean water tank according to instructions for Figs. 2-9 to 2-12. 4. Fill detergent container with HOOVER Carpet/Upholstery Detergent according to instructions for Figs. 2-13 to 2-15. 5. Attach tool to end of hose. -
Page 16: If You Have A Problem
Storage Before storing: • Empty clean water tank and let air dry. Replace on deep cleaner. • Unused detergent can be stored in the detergent container. • Empty recovery tank, rinse tank and lid thoroughly with clean water and let air dry. Allow brushes and underside of deep cleaner to air dry thoroughly before storing deep cleaner on a carpeted or... -
Page 17: Service
• calling 1-800-944-9200 for an automated referral of authorized service outlet locations (U.S. only). Do not send your cleaner to The Hoover Company in North Canton for service, this will only result in delay. If further assistance is needed, contact... - Page 18 HOOVER et sont des marques déposées HOOVER y son marcas registradas ® ® HOOVER and are registered trademarks ® 1-03 F7400-900 Litho USA 56518-161...