Using Logical Printers To Customize Your Printing - Axis 5900 User Manual

Note:
Wireless Printing
Check-list
Note:
Frequency Bands and
Channels

Using Logical Printers to Customize your Printing

AXIS 5900 User's Manual
The default Network Speed value is AUTO_SENSE. This option is the correct
option for the majority of users. If you choose the incorrect network speed
option for your network, you may lose contact with the print server. In order
to reset the Network Speed parameter to AUTO_SENSE, you will have to
perform a factory default on the print server.
Check the following before printing wirelessly. Click Admin | Network
Settings | Detailed View | WLAN to check the print server settings.
• The Network Mode parameter must be set to Auto Sense or WLAN. This
parameter is set on the Admin | General Settings page.
• To increase security, enable HTTPS before you set the WEP keys. HTTPS
enabled requires that you install a certificate. See
Network Print Server for Wireless Printing
• Check that the WLAN network interface is properly configured in the
workstation/laptop trying to access the Axis Network Print Server print
server.
• All communicating clients must be in the same operating mode, i.e. ad
hoc or infrastructure mode.
In Macintosh environments, the ad hoc mode is referred to as computer to computer mode
and the infrastructure mode is referred to as Airport network.
• Check that the SSID and the WEP keys are set according to your WLAN
network settings. See
information.
• Check that the radio frequency channel setting is the same on all
communicating clients and that the channel is set according to the
requirements in your country.
Country Frequency
Europe 2.412-2.472 GHz
France 2.457-2.472 GHz
Japan 2.484 GHz
USA/Canada 2.412-2.462 GHz
* (France) outdoor use permitted on private property with prior authorization
The Axis Network Print Server has a powerful facility for altering the
print data. This means that your desired print format can be realized on
any type of printer. The following actions can be invoked from the Axis
Management and Configuration
, on page 23
"WLAN Parameters"
on page 24 for more
Available Channels
1-13
10-13 (indoor use*)
14
1-11
Configuring the Axis
Default Channel
11
11
14
11
99