Axis 5900 User Manual page 104

Hide thumbs Also See for AXIS 5900:
Table of Contents

Advertisement

Management and Configuration
Example:
PostScript Settings
Example:
104
Follow the instructions below to convert ASCII print data to PostScript for
logical printer PR2:
1. From the print server's internal Web page, select Admin | Logical Printer
Settings.
2. Select the Printer2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Click the OK button.
If you select the parameter value AUTO_PS, the print data for every print
job is searched and if any ASCII data is found, it is translated into
PostScript. This setting is recommended if you are not sure if the print
data is ASCII or PostScript.
When a logical printer is set for PostScript conversion, you must specify
the following:
page size
page orientation
page formats
which font is to be used
The default page size is A4 and the default page orientation is Portrait,
while the page format parameters are as follows:
Page Format Parameter
Lines per page
Characters per line
Characters per inch
Lines per inch
Left margin
Top margin
The PostScript font can be any font that is installed in the printer; if no
font is specified, Courier will be used.
Follow the instructions below to set the PostScript parameters for logical
printer PR2:
1. From the print server's internal Web page, select Admin | Logical Printer
Settings.
2. Select the Printer2 tab.
3. Set the Printer Language Translation parameter to POSTSCR.
4. Set the PostScript Page Size parameter to LETTER.
5. Set the PostScript Page Orientation parameter to LANDS.
Default Value
66
0
0=disable line wrap
10.0
60
60 = 60 lines per inch
30
30 = 3.0 mm
50
50 = 5.0 mm
AXIS 5900 User's Manual

Advertisement

Table of Contents
loading

Table of Contents