o
Don't OverloadGenerator
Capacity
You must make sure your generator can supply enough
rated (running) and surge (starting) watts for the items you
will power at the same time. Follow these simple steps:
1. Select the items you will power at the same time.
2. Total the rated(running) watts of these items. This is the
amount of poweryour generator must produceto keep
your items running. See Wattage ReferenceGuide.
3. Estimate how many surge (starting) watts you will need.
Surge wattage is the short burst of power neededto
start electric motor-driven tools or appliances such as a
circular saw or refrigerator. Becausenot all motors start
at the same time, total surge watts can be estimated by
adding only the item(s) with the highest additional surge
watts to the total rated watts from step 2.
Example:
Tool or Appliance
Window Air
Conditioner
Refrigerator
Deep Freezer
Television
Light (75 Watts)
Watts
1200
8OO
5OO
5OO
75
3075 Total
RunningWatts
Total Rated (Running) Watts
Highest Additional Surge Watts
Total Generator Output Required
(Starting)Watts
1800
1600
500
1800 Highest
SurgeWatts
= 3075
= 1800
= 4875
Power Management
To prolong the life of your generator and attached devices, it
is important to take care when adding electrical loads to your
generator. There should be nothing connected to the
generator outlets before starting its engine. The correct and
safe way to manage generator power is to sequentially add
loads as follows:
1. With nothing connected to the generator, start the
engine as described in this manual.
2. Plug in and turn on the first load, preferably the largest
load you have.
3. Permit the generator output to stabilize (engine runs
smoothly and attached device operates properly).
4. Plug in and turn on the next load.
5. Again, permit the generator to stabilize.
6. Repeat steps 4 and 5 for each additional load.