Advertisement
Quick Links
THANK
Thank you for buying a Bumper/Guard for your Horse Model Tiller. To ensure safe
and proper installation of the Bumper/Guard, please read and carefully follow all
YOU!
instructions. If you have any questions or concerns, be sure to contact us for assistance.
Unpack and Check Parts
Check the contents of the shipping carton against the Parts List. Let us know if any parts are missing or damaged.
Parts List
Ref. #
Part #
1
1910731
Wraparound Assembly ..................... 1
2
736-0169
Lockwasher, 3/8" .............................. 2
3
710-0514
Screw, Hex hd., 3/8"-16 x 1" ............. 2
4
1909748
Spacer, 1/2" ...................................... 1
5
736-0921
Lockwasher, 1/2" .............................. 1
6
710-3181
Screw, Hex hd., 1/2"-13 x 1-1/2"....... 1
7
1910730
Bottom Brace Assembly ................... 1
8
710-0805
Screw, Hex Hd., 5/16"-18 x 1-1/2" .... 2
9
736-0119
Lockwasher, 5/16" ............................ 2
10
710-0267
Nut, Hex, 5/16"-18 ............................ 2
11
777S30653
Decal ................................................ 1
—
1909784
Hardware Kit (includes Refs 2-6 &
Refs. 8-10) .......................................—
Fig. 1: Contents of shipping carton.
1
1
Screw Length
Guide
Place screw on top of
2
2
template and measure
distance between
bottom of screw head
and tip of screw.
3
3
Description
Qty.
8
8
Tools
Needed
(2) 1/2" Wrenches*
(1) 9/16" Wrench*
(1) 3/4" Wrench*
(2) 7/16" Wrenches**
(1) Flat Blade Screwdriver
(1) Needle-nose Pliers
* Adjustable wrench can be
substituted
** For newer model electric
start tillers
Horse Tiller Wraparound Bumper Guard
®
OEM-290-255 / 290-255-081
11
9
7
6
1
3
2
10
10
9
4
5
CAUTION
Before
installing
Bumper/Guard, stop the
engine, wait for all moving
parts to stop, and allow the
engine to cool.
Disconnect the spark plug
wire and move it away from
the spark plug.
Remove the key from the
keyswitch on electric start
models.
769-00128 (02/2002)
3
2
1
the
Advertisement
Related Manuals for Troy-Bilt OEM-290-255
Summary of Contents for Troy-Bilt OEM-290-255
- Page 1 Horse Tiller Wraparound Bumper Guard ® OEM-290-255 / 290-255-081 THANK Thank you for buying a Bumper/Guard for your Horse Model Tiller. To ensure safe and proper installation of the Bumper/Guard, please read and carefully follow all YOU! instructions. If you have any questions or concerns, be sure to contact us for assistance. Unpack and Check Parts Check the contents of the shipping carton against the Parts List.
- Page 2 A. PREPARING YOUR TILLER 1. Stop the engine and wait for all moving parts to stop. Disconnect the spark plug wire and move it away from the spark plug. Remove the ignition key on electric start models. 2. Put the tines on the ground by pulling the depth regulator lever back and all the way up.
- Page 3 B. ADDITIONAL PREPARATION 3. For 6HP Tecumseh Engines: If e. Disconnect the starter motor the engine has a black plastic cable (J, Fig. 9) from the stud STEPS FOR ELECTRIC terminal (F, Fig. 6) on the re- on the starter motor. Replace START MODELS ONLY charging line, pull the terminals the mounting hardware on...
- Page 4 C. INSTALLING THE BUMPER NOTE: The throttle cable is d.) Align the holes in the L- e.) Loosely attach the legs with positioned below the wraparound, shaped legs on the wrap- two 3/8"-16 x 1" screws (M, with the exception of the 6HP around with the holes in the Fig.
- Page 5 Fig. 13 Fig. 12 Fig. 14 3. Assemble the 1/2"-13 x 1-1/2" NOTE: This completes the c. Reconnect the starter motor screw (O, Fig. 12), 1/2" lock bumper assembly steps for NON- cable (J, Fig. 9). washer (P) and spacer (N) to ELECTRIC START tillers.
- Page 6 2 through 4 on pg. 3. For customer assistance, visit www.troybilt.com, contact your nearest authorized dealer or: TROY-BILT LLC, P.O. BOX 361131, CLEVELAND, OHIO 44136-0019, 1-866-840-6483 Printed in U.S.A. Form 769-00??? (02/02)