Using The Self-Timer - Hitachi DZ-BD70E Instruction Manual

Press the confirmation button to
confirm, then MENU to end.
The selected movie quality will be
displayed in the LCD monitor
(p.50).
• The movie quality setting is
retained in memory even if the
power is turned off.
• When a BD is loaded in the
camcorder, and the BD is replaced
with another BD, the movie
3
quality setting will not change.
• When a DVD is loaded in the
camcorder, and the DVD is
replaced with another DVD or a
double-sided DVD is reversed, the
movie quality setting will not
change.
• When a DVD is replaced with a
BD, the movie quality will be
changed to the most recent BD
setting (and vice versa).
CARD

Using the Self-Timer

You can use the self-timer to record
still photos.
During still picture recording pause,
1
press MENU.
Select "Record Functions Setup"
2
"Self Timer"
Press the confirmation button to
confirm, then MENU to exit the
3
menu.
The self-timer is set and " 10"
appears in the LCD monitor (p.50).
Press PHOTO halfway to adjust the
focus, then press it all the way down.
A countdown starts. In the LCD
monitor, the countdown is
shown as follows: " 10", " 9",
.... The photo will be recorded
about 10 seconds later.
During countdown, the
recording indicator on the lens
side also flashes.
• To cancel the countdown and
4
return to " 10", press
PHOTO or
• The self-timer operates every
time PHOTO is fully pressed
and will not be set to "Off"
until the following is
conducted:
– Set the self-timer to "Off" in
the menu.
– Turn off the power.
– Switch to movie recording.
"On"
.
85