Table of Contents
Advertisement
Symptom
Movies are not
recognised by
ImageMixer 3 HD
Edition for BDCAM
on the PC.
The DISC EJECT
switch does not work
when the camcorder
is connected to a PC.
When the time stamp
of a file on a disc is
viewed on a PC, it is
different from the
actual recording
time.
It takes a long time
to save a video
edited on the video
editor of ImageMixer
3 HD Edition for
BDCAM.
Miscellaneous
Symptom
The camcorder does
not work.
Power does not come
on, or no operation
occurs by pressing
any button.
The date and time
are incorrect.
154
Cause and Correction
Make sure the power switch of this camcorder is set to
"HDD" or "BD/DVD".
While the camcorder is connected to the PC, use Explorer
to right-click the camcorder drive icon and select "Eject".
The file system of this camcorder is operated on
Greenwich Mean Time (GMT), and time lag information
has not been set. With Windows
time stamp of files viewed on Explorer looks different
from the actual recording time. The actual recording time
will appear for the date/time indication on the playback
screen.
If you are editing a video file whose contents are different
from those of the project settings, it may take some time,
since the entire video file must be re-encoded. Reconfirm
the project settings.
Cause and Correction
Is a fully charged battery attached?
Is the camcorder powered from the mains?
Connect a power source.
Press RESET, then turn on the power again.
Has the camcorder been subjected to impact?
The camcorder could be damaged. Consult your dealer.
Has the camcorder been left unused for a long period of
time?
The internal backup memory battery may be discharged.
Connect the AC power adapter/charger to recharge it.
®
as of July, 2007, the
Reference
page
15
128
—
—
Reference
page
23, 45
163
—
68
Advertisement
Table of Contents
