Table of Contents
Advertisement
Quick Links
Operator's
Manual
II:RAFTSMANI
evolv
m
12.0-Volt Ni-Cad Cordless
3/8 inch Reversible Drill/driver
Model No. 320. 30854
c( us
LISTED
WARNING:
To reduce the risk of
injury, the user must read and
understand
the Operator's
Manual
before using this product.
Charge
battery before first use.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• ESPAI_IOL
Sears Brands Management
Corporation,
Hoffman Estates, IL 60179 U.S.A.
www.oraftsman.oom
Advertisement
Table of Contents
Related Manuals for Craftsman evolv 320.30854
Summary of Contents for Craftsman evolv 320.30854
- Page 1 Operator's Manual II:RAFTSMANI evolv 12.0-Volt Ni-Cad Cordless 3/8 inch Reversible Drill/driver Model No. 320. 30854 c( us LISTED • WARRANTY WARNING: To reduce the risk of • SAFETY injury, the user must read and • ASSEMBLY understand the Operator's Manual •...
- Page 2 Exploded View and Part List pages 25-26 CRAFTSMAN EVOLV ONE YEAR LIMITED WARRANTY FOR ONE YEAR from the date of purchase, this product is warranted against any defects in material or workmanship. With proof of purchase, a defective product will be replaced free of charge.
-
Page 3: Safety Symbols
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols and the explanations with them deserve your careful attention and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warnings they give are no substitutes for proper accident prevention... - Page 4 SAVE THESE INSTRUCTIONS Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes...
-
Page 5: Work Area Safety
GENERAL POWER TOOL SAFETY WARNINGS WARNING: Read all safety warnings and instructions. Failure to follow the warnings and instructions listed below may result in electric shock, fire, and/ or serious personal injury. Save all warnings and instructions for future reference. The term "power tool"... -
Page 6: Personal Safety
PERSONAL SAFETY • Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use the tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. - Page 7 Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories, tool bits, etc., in accordance with these instructions, taking into account the working conditions and the...
- Page 8 • Use auxiliary handle, if supplied with the tool. Loss of control can cause personal injury. • Secure the workpiece. Clamping devices or a vise will hold the workpiece place better than the hand. • Always wait until the machine has come to a complete stop before placing it down.
- Page 9 SAFETY RULES FOR POWER UNIT WARNING: Read and understand all instructions. Failure to follow instructions listed below may result in electric shock, fire and/or serious personal injury. Before using the power unit, read all instructions and cautionary markings this manual, on the power unit, and the product using battery to prevent misuse of the products and possible...
-
Page 10: Safety Instructions
Do not operate the power unit with a damaged cord or plug, which could cause shorting and electric shock, if damaged, have the cord and plug repaired or replaced by a quanlified service technician. • Do not operate the power unit if it has received a sharp blow, been... - Page 11 ID]=_.'_o_[[e_] KNOW YOUR CORDLESS DRILL/DRIVER (Fig. 1) Fig. 1 Keyless Chuck Direction-of-Rotation Torque-Adjustment Ring Selector (Forward/ Center LocW Reverse Trigger Switch Worklight Battery-Release Button Power unit Plug -Jack Battery Pack PRODUCT SEPClFICATIONS Motor 12.0 Volt DC No Load Speed 0-650 (RPM) Chuck 3/8 inch Clutch...
- Page 12 _1, WARNING: The safe use of this product requires an understanding of the information on the tool and in this operator's manual, as well as knowledge the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
- Page 13 _f>'[,,'t _h, WARNING: If any parts are broken or missing, do not attach the battery pack to the drill/driver or operate the tool until the broken or missing parts are replaced. Failure to do so could result in possible serious injury. WARNING: Do not attempt to modify this drill/driver...
-
Page 14: How To Charge
HOW TO CHARGE THE BATTERY PACK (Fig. 2) Detach the battery pack from the drill/driver. Insert the power unit jack into Fig. 2 charging socket, making sure they are properly connected. Charging sock Power unit can be used with normal house voltage of 120 Charging indicator volts, 60 Hz, AC only. -
Page 15: Electric Brake
TO DETACH BATTERY PACK (Fig. 3} Lock the trigger switch on the drill/driver by placing the direction-of-rotation (forward/center-lock/reverse) selector in center position. Depress the battery release buttons located on the front of the battery pack to release the battery pack. Pull forward on the battery pack to remove it from the tool. -
Page 16: Operation
NOTICE: This drill/driver is equipped with an electric brake. When the brake is functioning properly, sparks may be visible through the vent slots in the housing. This is normal and results from the action of the brake. KEYLESS CHUCK (Fi!. 5) Keyless chuck Fig. -
Page 17: Led Worklight
DRILL MODE (Fig. 7) Fig. 7 Tore ue indicator Select the drill mode for drilling and other heavy duty applications. To select the drill mode, rotate the torque-adjustment ring until the drill icon aligns with the torque indicator and clicks into position. - Page 18 Tighten the chuck jaws Fig. 10 securely on the bit. Wrong! REMOVING BITS (Fig. 9} Remove the battery. Lock the trigger switch placing the direction-of- rotation selector in the OFF (center) position. Open the chuck jaws. NOTICE: Rotate the chuck body in the direction of the arrow Wrong! marked RELEASE to loosen the...
-
Page 19: Wood Drilling
If the bit jams in the workpiece or if the drill/driver stalls, stop the tool immediately. Remove the bit from the workpiece and determine the reason for jamming. WOOD DRILLING For maximum performance, use high-speed steel or brad-point bits for wood drilling. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. - Page 20 When drilling holes in tile, practice on a scrap piece to determine the best speed and pressure. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. WARNING: Always wear safety goggles or safety glasses with side shields during power tool operation or when blowing dust.
-
Page 21: General Maintenance
Alt WARNING: When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage. GENERAL MAINTENANCE Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged their use. - Page 22 Insert the hex key into Fig. 14 Mallet the chuck and tighten the chuck jaws securely. Tap sharply with a mallet in a counterclockwise direction. This will loosen the chuck on the spindle. It can now be unscrewed by hand. TO RETIGHTEN A Hex key LOOSE CHUCK...
-
Page 23: Battery Pack Removal And Preparation For Recycling
The batteries in this tool have been designed to provide maximum trouble- free life. Like all batteries, they will eventually wear out. Do not disassemble the battery pack or attempt to replace the batteries. Handling of the batteries, especially when wearing rings and jewelry could result in a serious burn. To obtain the longest possible battery life, read and understand... - Page 24 PROBLEM CAUSE SOLUTION The drill/driver does not work Battery is depleted Charge the battery Bit cannot be Chuck is not open Open the chuck installed Be sure cooling vents Clean, clear vents. Do not are free from dust and Motor overheating cover with hand during obstacles operation...
- Page 25 ---_z _ ____ rn 5"0. . r'--...
- Page 26 12.0 VOLT NI=CD CORDLESS DRILL/DRiVER MODEL NO. 320. 30854 The Model Number will be found on the Nameplate attached to the right side of the drill/driver. Always mention the Model Number when ordering parts for this tool. 3321277000 Left Housing Assembly 2790262000 Motor and Gear Case Assembly 3660466000...
- Page 27 I_[e]li_l 30854 Manual Revised 11-0616 Page27...
- Page 28 I_[e]li_l 30854 Manual Revised 11-0616 Page28...