Craftsman 917.28033 Operator's Manual page 24

3. A'I-FACH MOWER SIDE SUSPENSION
ARMS (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
chassis and secure with retainer spring,
4. Repeat on opposite side of tractor,,
5,
.
ATTACH REAR LIFT LINKS (C) - Lift
rear corner of mower and position slot
in link assembly over pin (D) on rear
mower bracket and secure with washer
and retainer spring°
ATTACH FRONT LINK (E) - Work from
left side of tractor, Insert rod end of link
assembly through front hole in tractor
front suspension bracket (F)..
7. Insert end of link (E) into hole in front
mower bracket (H) and secure with
washer and retainer spring (J) o
8_ Hook end of clutch cable spring (Q) into
hole in idler arm (R).
9, Push clutch cable housing guide (P) into
bracket,
10, Install belt onto engine pulley (M) and belt
keepers (G).
IMPORTANT: Check belt for proper routing
in all mower pulley grooves_
11.Raise attachment lift lever to highest
position,
12, If necessary, adjust gauge wheels before
operating mower as shown in the Opera-
tion section of this manual_
REVISION
LLANTAS
Las ]lantas e
masiado en la
presi6n de la_
para obtener
• Reduzca la
que se indk
REVISION
CON JUNTO
Para obtener I
la caja de la
en la forma
LA CAJA DE
Servicio y Aju!
REVISION U
DE TODAS
Vea las figura
correas de im
dora y de mov
Ajustes de estl
sJgan su paso
REVISION E
Una vez que u
tractor, verifiql
mente. Ver "F
BIEN EL FRE
ajustes de est
24