Craftsman 320.27680 Operator's Manual page 24

TOGGLE "ON/OFF" SWITCH (Fig. 11)
Your router motor is turned "ON" and "OFF"
with the toggle switch located on the top cap
of the motor housing.
The left side of the toggle switch hood (as
you face it) is marked "O" for "OFF" and the
right side (as you face it) is marked "1" for
"ON."
To turn the motor "OFF," push the toggle
switch to the left side marked "O" or "OFF."
To turn the router motor "ON," push the
toggle switch to the right side marked "1"
or "ON."
Fig. 11
Always hold the router and cutter bit away from the workpiece when turning the
toggle switch "On." Only contact the workpiece with the router and cutter bit
after the router has reached the full selected speed. Only remove the router and
cutter bit from the workpiece after turning the router motor "OFF" and after the
cutter bit comes to a complete stop.
SOFT START FEATURE
The soft start feature minimizes torque twist,
customary in larger router motors, by limiting
the speed at which the motor starts. This
increases the motor's life.
LED WORKLIGHTS (Fig. 12)
Your router motor has 3 built-in worklights
located around the collet/nut to provide high
visibility of workpiece when cutting. These
lights are always "On" when the toggle switch
is in the "ON" position.
"LIVE TOOL INDICATOR" LIGHT (Fig. 13)
Your router also has a "Live Tool Indicator"
green light, located on the motor housing top
cap where the power cord enters the motor
housing. This green light is always on when
router motor is plugged into a power source.
HEAVY-DUTY EDGE GUIDE
The router combo kit comes with a heavy
duty edge guide. This edge guide can be
used as an aid in routing applications such as
decorative edging, straight edge planning and
trimming, grooving, dadoing and slotting.
Fig. 12
"Live tool
indicator"
light
27683 ManuaLRevised_11-0120 Page 24