Restart Menu; Updating Your System Uefi Bios - Lenovo ThinkPad T430 User Manual

Table 7. Startup menu items (continued)
Menu item
Boot Mode
Option Keys display
Boot Device List F12 Option
Boot Order Lock

Restart menu

If you need to close the ThinkPad Setup and restart the system, select Restart from the ThinkPad Setup
menu. The following submenu is displayed:
• Exit Saving Changes: Restart the system after saving the changes.
• Exit Discarding Changes: Restart the system without saving the changes.
• Load Setup Defaults: Load the default setting that was in effect at the time of purchase.
• OS Optimized Defaults: Enable OS Optimized Defaults to meet the Microsoft Windows 8 certification
requirements. When you change this setting, some other settings are changed automatically. The affected
settings are CSM Support, UEFI/Legacy Boot, Secure Boot, and Secure RollBack Prevention.
• Discard Changes: Discard the changes.
• Save Changes: Save the changes.

Updating your system UEFI BIOS

The Unified Extensible Firmware Interface (UEFI) BIOS is a part of the system programs that make up the
basic layer of software built into your computer. The UEFI BIOS translates the instructions from other
software layers.
Your computer system board has a module called EEPROM, also referred to as flash memory. You can
update the UEFI BIOS and the ThinkPad Setup program by starting your computer with a flash update
optical disc or flash update application running in the Windows environment.
In some instances when you add software, hardware, or a device driver, you might be informed that you
need to update your UEFI BIOS in order for the new addition to work properly.
To update your UEFI BIOS, go to the following Web site and follow the instructions on the screen:
http://www.lenovo.com/ThinkPadDrivers
128
User Guide
Value
• Quick
• Diagnostics
• Disabled
• Enabled
• Disabled
• Enabled
• Disabled
• Enabled
Comments
Screen during the POST:
• Quick: The ThinkPad Logo screen is
displayed.
• Diagnostics: Text messages are
displayed.
Note: You also can enter Diagnostic
mode by pressing Esc during the POST.
If you select Disabled, the "To interrupt
normal startup, press Enter." message is
not displayed during the POST.
If you select Enabled, the F12 key is
recognized and the Boot Menu window
is displayed.
If you select Enabled, the boot priority
order is locked for your future use.