Lenovo ThinkPad T430 User Manual page 136

Table 5. Config menu items (continued)
Menu item
Beep and Alarm
120
User Guide
Submenu item
Express Card Speed
Power On with AC Attach
Intel (R) Rapid Start
Technology
Password Beep
Keyboard Beep
Value
• Generation 1
• Automatic
• Disabled
• Enabled
• Disabled
• Enabled
Enter after:
• Immediately
• 1 minute
• 2 minutes
• 5 minutes
• 10 minutes
• 15 minutes
• 30 minutes
• 1 hour
• 2 hours
• 3 hours
• Disabled
• Enabled
• Enabled
• Disabled
Comments
activity. Normally, it is not
necessary to change the
setting.
Set the transfer speed of the
ExpressCard to the desired
level of performance.
The Automatic option
enables the ExpressCard to
specify the transfer speed it
supports.
Enable or disable a feature
that powers on the system
when the ac power adapter
is attached.
If you select Enabled, the
system is powered on when
the ac power adapter is
attached. When the system
is in hibernate state, the
system resumes.
If you select Disabled, the
system is not powered on
nor resumed when the ac
power adapter is attached.
To use this feature, a special
partition on the solid state
drive is required.
When enabled, you can
enable the 30 Day Standby
function through the Power
Manager program or the
Lenovo Settings program.
The function enables the
computer to enter a lower
power state after the
specified time in sleep
state. And it takes only
seconds to resume normal
operation.
Enable this option to have
a beep sound when the
system is waiting for a
power-on, hard disk, or
supervisor password.
Different beeps will sound
when the entered password
matches or does not match
the configured password.
Enable or disable keyboard
beep when unmanageable
key combinations are
pressed.