Page 1
Cordless Solo S2 is designed in the USA. Printed in the USA. Escort Incorporated 5440 West Chester Road West Chester, Ohio 45069 Sales /Service 800-433-3487 Fax 513-870-8509 www.escortradar.com R A D A R • L A S E R •...
If this is your first detector, please read the manual superior range and reduced false alarms, our patented in detail to get the most out of your Solo S2’s Mute and AutoMute, audible and visual band alerts, outstanding performance and innovative features.
Symbol:+ or • or -- Pilot +.> Symbol,with scanning dot Pilot +> Scanning symbol AUTO POWER aPwr ON Turns Solo S2 on and off automatically aPwr OFF Turn Solo S2 on and off manually POWER-ON SEQUENCE PwrOn STD Standard power-on sequence PwrOn FST...
Programming options and SWS messages are also displayed. Solo S2 is ready to go, just plug it in and turn it on. If you prefer, you can also easily customize up to10 fea- NOTE: When using Solo S2 in battery mode, the tures for your specific driving preferences.
WARNING! ESCORT cannot anticipate the many ways Solo S2 can be mounted. It is important that you mount Solo S2 where it will not impair your view nor present a hazard in case of an accident. Where to mount Solo S2...
The Mute button, located on the top case of the Solo the prompt, the detector will shut down completely. S2, allows you to silence the audio alert during a To turn the Solo S2 back on, simply press the PWR radar encounter. button.
Since Laser signals are a possible threat no matter using ExpertMeter. how weak, Solo S2 alerts you to all laser signals with a To use the ExpertMeter instead of the standard bar full laser alert.
Solo S2 will beep twice and display “Program.” How to use EZ-Programming 2 Then hold the RVW button down. Solo S2 will 1 To enter Program Mode, press and hold either scroll through the categories, starting with Contrast, of the “VOL” (up or down) buttons, and the “M”...
Page 9
If not, the Solo S2 will shut off completely, maximizing battery life. aPwr OFF In this setting, Solo S2 requires that you turn it on and off manually using the PWR button. Power-on Sequence (Symbol with scanning dot) PwrOnSTD In this setting, each time you turn on Solo S2, it will display “Solo S2,”...
Page 10
City STD (Standard) Brt Auto In this setting, when you put Solo S2 in the City mode, In this setting, the Solo S2’s display and pilot lights X-band sensitivity is significantly reduced, to reduce will adjust automatically based on the vehicles inte- annoyance from X-band intrusion alarms and motion rior brightness.(factory default)
Page 11
The following examples will give you an from your Solo S2 and how to interpret what it tells you. introduction to understanding Solo S2’s warning system for radar, laser and safety alerts.
Page 12
X-Band radar, As your vehicle travels into range, the microwave your Solo S2 will occasionally receive non-police beam bounces off your car, and the radar antenna radar signals. Since these X-Band transmitters are looks for the reflections.
Page 13
Safety signals on a 64 possible messages (60 currently allocated). The daily basis. Do not be surprised if you encounter SWS messages your Solo S2 can display are listed on emergency vehicles, road hazards and railroad crossings that are unequipped with these transmitters.
Page 14
™ • Solo S2 feels very warm. Explanation of Displays No display Solo S2 is in the Dark mode, and is programmed for Full Dark (page 18) PilotHWY One of the many pilot programming messages (pages16) WorkZone One of the many Safety Radar messages (pages 24-25) Caution Solo S2 has detected a Safety Radar Signal, but the signal isn’t yet strong...
If the problem requires within 30 days (or if you notify us that you choose not that you send your Solo S2 to the factory for repair, we to have your Solo S2 repaired at the price quoted), will provide you with a Service Order Number, which your Solo S2 will be returned, without repair.
Page 16
4,571,593 4,313,216 D314,178 D313,365 • Pilot Light D310,167 D308,837 D296,771 D288,418 D253,752 • Auto Power Solo S2 is also covered by one or more of the following • Power-On Sequence Canadian patents: • Signal Strength Meter 1,295,715 1,295,714 1,187,602 1,187,586 •...