Optional Reception Settings - Sharp FO-P610 Operation Manual

Optional Reception Settings

Fax Signal Receive
Your fax will automatically begin reception if you hear a soft fax tone after
answering a call on your fax or an extension phone. If you use a computer fax
modem to send documents on the same line, you must turn this function off in
order to prevent your fax from mistakenly attempting to receive documents
from the computer fax modem. Follow the steps below to change the setting.
1
FUNCTION
Press
2
Press once and
the FO-P610, or 6 times on the FO-
P630.
3
Press once.
4
Press to turn on the function, or
1
to turn it off.
2
5
STOP
Press
Changing the number for remote fax activation
If desired, you can use a number other than 5 to activate fax reception from an
extension telephone. You can select any number from 0 to 9.
1
FUNCTION
Press
2
Press once and
3
Press once.
once and once.
5 times on
to return to the date and time display.
once and once.
once.
Optional Reception Settings
Display:
OPTION SETTING
FAX SIGNAL RX
1=YES, 2=NO
The display briefly shows
your selection, then:
CALLER-ID
Display:
OPTION SETTING
FAX REMOTE #
ENTER (0-9) (5)
47