1. Installation
Unpacking Checklist
Before setting up,
make sure you
have all of the
following items.
Paper tray
Paper tray
extension
Handset
Handset cord
Points to keep in mind when setting up
Do not place the
machine in direct
sunlight.
About condensation
If the machine is moved from a cold to a warm place, it is possible that
condensation may form on the scanning glass, preventing proper scanning of
documents for transmission. To remove the condensation, turn on the power
and wait approximately two hours before using the machine.
10
Operation
manual
Telephone
line cord
Do not place the
machine near
heaters or air
conditioners.
Gears (2)
Imaging film
(initial starter
roll)
Keep dust away from
the machine.
If any are missing,
contact your
dealer or retailer.
Adapter
(for Australia)
Adapter
(for New Zealand)
Keep the area
around the
machine clear.