Table of Contents
Advertisement
------------------------------------------------------------------------------------------------------------------------------------------------------ WINDOWS 2000
2.5
Windows 2000 Setup
2.5.1
Install the Modem Driver
1. Close all applications.
2. Choose Start > Settings > Control Panel.
3. Double click on Phone and Modem Options.
4. Select the Modems tab and click Add...
5. Check "Don't detect my modem; I will select it from a list." Then, click Next >.
6. From the Manufacturer list, highlight Iridium
7. Click Iridium PPP Data Modem, and then click Next>.
8. Click the "Selected ports" button. Click on an available COM Port (e.g., COM1). This is the port to
which you will connect your Iridium phone. Click Next >.
9. Click Finish.
2.5.2
Configure Dial-Up Networking
1. Choose Start > Programs > Accessories > Communications > Network and Dial-up Connections.
2. Double-click Make New Connection, and click Next>.
3. Select "Dial-up to private network" and click Next>.
4. If a "Select a Device" window appears, check the box next to "Modem - Iridium PPP Data Modem",
and uncheck all other devices. Click Next>.
5. In the Phone number box, enter 008816000025 and click Next>.
6. Choose either "For all users" or "Only for myself" and click Next>.
7. Enter a name for your connection (e.g., "Iridium Direct Internet 2.0") and click Finish.
8. Click Properties.
9. Click the Networking tab.
10. Make sure "Internet Protocol (TCP/IP)" is checked. Uncheck all other components.
11. Click OK.
12. Close the connection box.
Iridium Satellite LLC
7
February 22, 2006
Advertisement
Table of Contents
