Cable-Tv Operations - Zenith SENTRY 2 Operating Manual & Warranty

GETTING TO KNOW YOUR REMOTE CONTROL
CABLE-TV OPERATIONS
The following functions and operations apply to a Zenith
cable-TV decoder. The remote control supplied with your
eable-TV decoder may have keys not duplicated on the new
remote. If these functions are desired, the original remote
control will have to be used.
For complete information on how to operate your cable-TV
decoder, refer to the operating guide provided with it.
The remote control must be in the CABLF. mode to
operate your cable-TV decoder. The VOLUME control
will always adjust the TV volume regardle,,_ of the selected
operating mode of the remote.
t
MODE
Press repeatedly to select the
CABLE mode of operation.
CABLE
Lights when CABLE mode of
peration is selected.
MENU, SELECT, ADJUST
and Qurr
Function depends on
cable-TV system.
Numbered Buttons
Used to select channels through
cable-TV decoder
ENTER
Press after a channel number is entered
to change channel instantly.
For optimum performance, point the remote
control toward your cable-TV decoder.
ADJ. [i]
SELECT QUIT
@®®
®®®
®®®
®.L )
C=) CZ_ (:_:)
A B
_@5_ C=D CZD
CZD OD C_D
(5_D C_D C_D
OFF ON
SOURCE
O
FLASHBK
_J
CHANNEL
_J
VOLUME
®
CZD
CZD
CZD
I'V_R
OFF!ON
Used to turn cable-TV decoder
ON or OFF.
SOURCE
Selects "A" or "B" caLblechannels.
CHANNEL Up/Dower
_ sexlto sequence through cable-TV
channe:_.
_ VOI.,UME Up/Down
Usexl to adjust the voluane level of the TV.
Remote Control MBR3420
Cable-TV Decoder Operations
2s9_o 3 -- 4