Advertisement
Quick Links
Operator's
Manual
ICRRFTSIVlRN°I
32cc/1.9 cu.in. 2-Cycle
17 Inch Cutting Path / 0.080 Inch Line
GASOLINE
WEEDWAOKER
®
Model No.
358.791041
•
Safety
• Assembly
•
Operation
•
Maintenance
•
Parts List
° Espa_ol,
p. 22
WARNING:
Read and follow all Safety
Rules and Operating
Instructions
before first use of this product.
For answers
to your questions
about this product:
Call 7 am-7
pm, Mon.-Sat.,
or 10 am-7
pm, Sun.
1-800-235-5878
(Hours listed are Central Time)
Sears,
Roebuck
and Co., Hoffman
Estates,
IL 60179 U.S.A.
545154230
Rev. 1
7/3/07
BRW
Advertisement
Related Manuals for Craftsman WEEDWACKER 358.791041
Summary of Contents for Craftsman WEEDWACKER 358.791041
- Page 1 Operator's Manual ICRRFTSIVlRN°I 32cc/1.9 cu.in. 2-Cycle 17 Inch Cutting Path / 0.080 Inch Line GASOLINE WEEDWAOKER ® Model No. 358.791041 • Safety • Assembly • Operation • Maintenance • Parts List ° Espa_ol, p. 22 WARNING: Read and follow all Safety Rules and Operating Instructions before first use of this product.
- Page 2 Sears store, Sears Service Center, or other Craftsman outlet in the United States for free repair (or replacement if repair proves impossible).
- Page 3 If situations occur which are not cov- _WARNIN_I: When using gar- ered in this manual, use care and dening appliances, basic safety pre- good judgment. If you need assis- cautions must always be followed to tance, contact your Sears Service reduce the risk of fire and serious Center or call 1-800-235-5878.
- Page 4 Keep cutting unit can be hung by the shaft. line at proper length. • Store unit out of reach of children. • Use only Craftsman® brand replace- This unit is not equipped with an anti- ment line. Never use wire, rope,...
- Page 5 LINE TRIMMER SAFETY Blade rotates Allow blade to stop momentatlly _ WARNING: Inspect the area to after the tdgger is / be trimmed before each use. Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line.
- Page 6 • Check airintake opening, blower etc.) which can be thrown or become tubes o rvacuum t ubes frequently, entangled in the blade or trimmer line. always with engine stopped and • Throw away and replace blades that spark p lug disconnected. Keep are bent, warped, cracked, broken...
- Page 7 • Disconnect attachment from the drive engine before cleaning the tines w ith WARNING: A coasting blade/ro- ahose a nd water toremove any tating chain can cause injury while it build-up. Oil t he tines t oprevent rust. continues to move after the engine is •...
- Page 8 before continuing. Contact Sears the terrain and other hidden haz- Service forrepair orreplacement ards. affected parts a snecessary. • Make sure the rotor will spin freely SNOW T HROWER SAFETY before attaching the snowthrower the powerhead. '_LWARNING: Keep hands and •...
- Page 9 ATTACHING SHIELD Loosen the coupler by turning the knob counterclockwise. ,_IkWARNING: The shield must be properly installed. The shield provides Coupler LOOSEN partial protection from the risk of thrown objects to the operator and others and Shipping is equipped with a line limiter blade protector which cuts excess line to the proper length.
- Page 10 IMPORTANT quality synthetic 2-cycle air-cooled en- gine oil. We recommend Craftsman Alcohol blended fuels (called gasohol brand synthetic oil. Mix gasoline and oil or using ethanol or methanol) can at- at a ratio of 40:1.
- Page 11 If the unit still doesn't start, refer to Move ON/OFF switch to the ON TROUBLESHOOTING TABLE or call position. 1-800-235-5878. Slowly press the primer bulb 6 CRAFTSMAN ® times. CONVERTIBLE FEATURE Move the start lever to the START This model is equipped with a coupler position.
- Page 12 REMOVING TRIMMER ATTACH- erator's manual. Using the wrong hole MENT (OR OTHER OPTIONAL could lead to serious injury or damage to the unit. TACHMENTS) CAUTION: When removing or instal- ling attachments, place the unit on a Secondary Hole flat surface for stability. 1.
- Page 13 Always release the throttle trigger and SCALPING - The scalping technique allow the engine toreturn toidle removes unwanted vegetation down to speed w hen n ot c utting. the ground. Hold the bottom of the trim- HOW TOSTOP Y OUR U NIT mer head about 3 inches (8 cm) above •...
- Page 14 MAINTENANCE SCHEDULE WARNING: Disconnect the spark plug before performing maintenance except for carburetor adjustments. CARE & MAINTENANCE TASK WHEN TO PERFORM Before each use Check for loose fasteners and parts Before each use Check for damaged or worn parts After each use Inspect and clean unit and decals Clean air filter Every 5 hours of operation...
- Page 15 0.025 inch (0.6 mm). Ignition timing is with a 3/4 inch socket wrench. fixed and nonadjustable. Reinstall the spark plug boot. LINE REPLACEMENT • Always use Craftsman replacement line. Choose the line size best suited for the job at hand. Red line is designed Positioning for cutting grass and small weeds.
- Page 16 Run engine at least 3 min- reach sparks or open flames from utes after adding stabilizer. water heaters, electric motors or Craftsman 40:1,2-cycle engine oil (air switches, furnaces, etc. cooled) is already blended with fuel •...
- Page 17 TROUBLESHOOTING TABLE WARNING: Always stop unit and disconnect spark plug before perform- ing all of the recommended remedies below except remedies that require unit to be operating. REMEDY TROUBLE CAUSE Engine will not 1. ON/OFF switch 1. Move ON/OFF switch to the ON start.
- Page 18 YOUR WARRANTY RIGHTS AND OB- and responsibilities, you should contact LIGATIONS: The U.S. Environmental your nearest authorized service center or call Sears at 1-800-469-4663. Protection Agency/California Air Re- WARRANTY COMMENCEMENT sources Board and Sears, Roebuck and Co., U.S.A., are pleased to explain DATE: The warranty period begins on the emissions control system warranty the date the small off-road engine is...
- Page 19 EMISSION CONTROL WARRANTY MAINTENANCE, REPLACEMENT AND REPAIR OF EMISSION RE- PARTS LIST: Carburetor, Ignition Sys- LATED PARTS: Any Sears approved tem: Spark Plug (covered up to mainte- replacement part used in the perfor- nance schedule), Ignition Module, Muf- mance of any warranty maintenance fler including catalyst, Fuel Tank repair on emission related parts will be (California only).
- Page 20 REPAIR PARTS SEARS TRIMMER MODEL 358.791041 WARNING repairs, adjustments maintenance not described the Operator's Manual must be performed by qualified service personnel.._,"....Ref, Part No, Description Part Description ' 1. 530015805 Screw-alignment 530016152 Wingnut 530015886 Screw 71-85740 Head-Cutting 530057983 Hsg.-Throttle...
- Page 21 REPAIR PARTS WARNING SEARS TRIMMER MODEL 358.791041 All repairs, adjustments maintenance not described the Operator's Manual must performed qualified service personnel. Ref. Part No. Description Ref, Ref, Part No. Part No. Description Description 530047721 Bulb-Purge 530055492 Isolator-Tank 530055122 Assy-Clutch 530071717 Kit-Choke Lever 530054941...