Operation; Product View And Parts Identification; Operating Position - Craftsman 358.796500 Operator's Manual

ed to this unit. As a result, the exten-
sion cord usedwith your unit can be
pluggedinto any standard 120volt
electdcal outlet.
Safety precautionsmustbe observed
when operatingany electricaltool. The
doubleinsulation systemonly provides
added protectionagainst injury result-
ing from an Internalelectricalinsulation
failure.
_1_ WARNING: All electrical repairs
to this unit, including housing, switch,
motor, etc., must be diagnosed and re-
KNOW YOUR EDGER
paired by qualified service personnel.
Replacement parts for a double insu-
lated appliance must be identical to the
parts they replace. A double insulated
appliance is marked with the words
DOUBLE iNSULATION or DOUBLE INSU-
LATED. The symboll-0-1 (square within a
square) may also be marked on the
appliance. Failure to have the unit re-
paired by Sears service personnel can
cause the double insulation construc-
tion to become ineffective and result in
serious injury.
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ControlHandle
Trigger
Switch
Depth __ /
Adjustment /
The TRIGGER SWITCH is used to acti-
vate the motor.
The
PIVOT LOCKING LEVER is en-
gaged to reposition the cutting angle.
The BLADE Is designed to cut grass.
Pivot Locking Lever
Blade Guard
Blade
The BLADE GUARD provides protec-
tion from the spinning blade.
The DEPTH ADJUSTMENTKNOB allows
you to adjust blade to the desired depth.
OPERATING INSTRUCTIONS
OPERATING POSITION
Your unit has two operating positions,
one for edging, one for beveling.
To set operating position:
• Move pivot locking lever toward han-
dle and hold. Pivot motor to desired
position. Release pivot lockinglever,
making sure motor locks into position.
_,,_ Pivot
Locking Lever
6