Craftsman Chuck Key Holder - Craftsman 315.10411 Owner's Manual

OPERATION (Cont.)
CRAFTSMAN CHUCK KEY HOLDER
1 Form a loop by forcing end with round holes through slotted hole or_ opposite end See
Figure 8,
2, Place the loop over the cord and putl it tight. See Figure 9
3. Mount the chuck key by insetting the geared end through the hole in the holder, Large keys
in the larger hote, smaller keys in the small hole. See Figure 10,
CHUCK KEY
HOLDER Fig. 8
CORD
Fig 9
0
CHUCK KEY
The operation of any Dtlll can result in foreign objects being thrown Into your eyes, which
can result tn severe eye damage. Before commencing power tool operation, always wear
safety goggles or safety glasses with side shields and e lust lace shield when needed. We
recommend Wide Vision Safety Mask for use over spectacles or standard salary glasses
with side shields, evaltebEe at Sears Catalog Order or Retail Stores.
Page 8