Advertisement
Available languages
Available languages
PRESSURE WASHER
OPERATING FEATURES
CLICK=N-CLEAN + SPRAY LANCE
(Fig. 4)
Z_ WARNING: Do not move the nozzle
to adjust
spray
while the trigger
is
squeezed.
The Click-N-Clean + 4 n 1 nozzle has
four spray settings. Turn the collar 90 °
to the desired position.
S. _
The
Low
Pressure
Soap
position
is
intended
for dispen-
sing detergent.
T. _
The High Pressure Jet
Stream
position
is
intended
for
cleaning
with high pressure.
U._lip
The
High
Pressure
Wide
Fan
Spray
position is intended for
cleaning
with
high
pressure.
V. L3"_"3.__
The
High
Pressure
Oscillating
Fanned
Turbo Spray position
is intended for optimal
cleaning.
NOTE: The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
NOTE: The pressure of the spray on
the surface you are cleaning increases
as you move the wand closer to the
surface.
CAUTION:
The
High
Pressure
Jet
Stream
spray
position
is very
aggressive.
We recommend
that for
most cleaning applications
a fan spray
pattern
(U or V) be used to avoid
damage to the surface being sprayed.
POWERSWIVEL + FAN SPRAY WAND
(FIG. 5)
CAUTION: The red nozzle portion of
the lance pivots 360 °. This adjustment
can only be made when the gun trigger
is completely released. Do not attempt
to adjust the nozzle when the machine
is in operation.
Failure to follow
this
instruction
could
result
in personal
injury.
The nozzle pivots 360 ° and delivers a
high pressure fan spray pattern to clean
the hard to reach areas.
O
USING DETERGENT (FIG. 6-7)
NOTICE: Use only approved pressure
washer cleaners.
Do not use bleach,
chlorine,
or any cleaners
containing
acids.
NOTICE:
Fill and flush the detergent
tank with clear water after use.
1.
Insert the spray lance (B) into the
gun
(A) by pushing
firmly
and
simultaneously
twisting a 1/4 of a
turn counterclockwise
until locked
into place.
0
10-ENG
Advertisement
