Restore Factory Settings; Reboot Device; Network Settings; Basic Network Settings - X10 AIRSIGHT XX34A User Manual

3.1.4 Restore Factory Settings

Click Restore Factory Settings, will pop-up a prompt, select OK, all the parameter will be returned to factory
settings, and the device will reboot.
Figure 5.5

3.1.5 Reboot Device

Click Reboot the device, will pop-up a prompt, select OK, then the device will reboot
Figure 5.6

3.2 Network Settings

Click Network, will pop-up the prompt as below:

3.3 Basic Network Settings

Here you can set the camera's IP address; i.e., set the static IP address of the camera manually.
You can also do the same settings from IP Camera Tool. (Figure 2.3).
29