Windsor SPIRIT DUAL SPD-J Manual page 6

SPIRIT
1. Fill the solution tank.
A. Press down with foot.
NOTE: Starting the machine with dry brush rest-
ing on floor may trip the brush motor circuit
breaker.
10. Pull the machine backwards at a steady pace.
11. Release the solution lever about 12" inches (150
12. Allow each cleaning pass to overlap the previous
An overflow of foam from in the recovery tank
into the vacuum intake can damage the vacuum-
motor. Always be aware of the waste water level
and foam in the recovery tank, es ecially when
using an accessory tool. BEFOR E foam or solu-
tion is pulled into vac intake empty the recovery
tank.
Never put defoaming compound in the solution
tank. Damage to pump will result.
NOTE:The vac motor is protected by a circuit
breaker which will only trip under conditions of
abuse, such as an overflow of foam into the
dome. When an overflow does occur the vac
motor must be allowed to dry thoroughly before
continuing work.
2. Run motor to dry.
6
When not using the machine put the brush in
the storage position. (see daily maintenance on
page 8) Leaving the brush on the floor for long pe-
riods of time may ruin It.