Call Blocker ™ ™ AUTOMATICALLY BLOCKS AND ROUTES SCREENED CALLS WITH CALLER ID U.S. Patent 5,490,210, Patent Pending Owner’s Manual Version 10.2011 Copyright 1990-2011. All Rights Reserved. Digitone Call Blocker, Call Blocker and Personal Communicator are trademarks of Digitone Communications.
1. Connect the supplied line cord to your telephone wall jack and then to the Line Port on the Call Blocker. You must connect the Line cord and your phone to the correct ports in order for the Digitone Call Blocker to operate properly. Initially, “Line In Wrong Port” will show on the display until the Line cord is plugged into the LINE port.
How Digitone’s Call Blocker Operates When calls come in, all calls displaying a phone number will ring through to the phones throughout your home/office like normal and to the TEL phone port on the back of the Call Blocker. Calls like Anonymous, Out Of Area, Private and Unknown displaying no phone number will be answered by the Call Blocker and hung-up on unless program Code 72 is enabled to allow these call types to ring in.
Standard Caller ID Display Automatic Caller ID Call Routing Caller ID service from your phone company is required for Digitone’s Call Blocker to work. The first call to your Call Blocker unit will initialize the Clock and Date to the current date and time.
Viewing Caller Lists You can review what numbers are stored in each caller list by entering programming: press and hold the Program Button for 3 seconds until you see “Program Mode”, then “Pick Up Phone”, when the prompt for “Enter Code” displays enter code: Code 41 to view Blocked Caller list –...
Programming Numbers - Invited, VIP and Blocked Global Invite (Factory Default) Invites all callers who display a phone number You can invite all callers who display a phone number and yet block a single number or area code. This one command will allow all Invited callers who display a phone number to ring through to the TEL phone port and all other devices connected directly to the phone line.
Programming Numbers - Invited, VIP and Blocked (con’t) Inviting Individual Callers and Code 97 # * - “I want to Block all callers and just allow one or more numbers”. Note from the factory, all callers with a number displayed are already invited and can ring through, but you can create your own caller list by disabling the Global Invited list first.
After Hours Mode - Programmable Time Feature Introduction During a certain time of the day or night you can set the Call Blocker to enter into After Hours Mode. This mode is designed to keep phones connected to the TEL phone port from ringing and allow calls to be answered by an optional answer machine when it is enabled on a daily basis.
“Enter Code” displays, enter code 99 # *. Call Blocker Compatibility Digitone’s Call Blocker 10 works with all makes of telephony equipment including Panasonic, Uniden, AT&T, and all U.S. Domestic and Foreign FSK Caller ID systems on standard 2-wire telephone lines, DSL Modems, FIOS and VoIP (ATA) Adapters, Cable Modems, North and South American phone systems including Mexico, Costa Rico, Canadian and Digital to Analog phone services from Skype™, Vonage™, Cell...
Troubleshooting and Setup Help “When I am in Programming I don’t see the “Enter Code” prompt even though I have picked up the phone.” The prompt for “Pick Up Phone” is for normal corded phones but if you are using a cordless phone handset, you will also have to press the Talk or SPKR button on the cordless phone handset to receive the Enter Code prompt.
“Pick Up Phone”, when the prompt for “Enter Code” displays, enter code 98 # *. This clears all your call lists. Next, when the prompt for “Enter Code” displays again, enter code 99 # *. This fully resets the Call Blocker to Digitone Default settings from the factory. 2-Line Phones The Call Blocker is a single line operation and the 2 conductor line cord supplied with it only carries a single line.
1-877-610-5693 to obtain a Return Merchandise Authorization (RMA). The purchaser would then put this code on the exterior of the package shipped to Digitone. Any unit returned without this code will be refused and returned at sender's expense. Product should be shipped freight prepaid along with evidence...