Nozzle, Needle, And Tip Selection - Graco DELTA SPRAY XT GUN 310692D Instructions - Parts Manual

Nozzle, Needle, and Tip Selection

The chart below lists the available nozzle sizes and
required fluid needle and nozzles for the Delta Spray XT
guns. The HVLP, Compliant, and Airspray guns all use
the same nozzle design and fluid needles. When spray-
ing high flow rates and high viscosity materials use the
larger nozzle sizes and when spraying light materials or
low flow rates, use the smaller nozzle sizes.
Nozzle
Orifice
in.
(mm) Nozzle
.030 234741
(.75)
.042 234742
(1.0)
.051 234743
(1.3)
.055 234744
(1.4)
.059 234745
(1.5)
.070 234746
(1.8)
.086 234747
(2.2)
.110 234748
(2.8)
.042 234749
(1.0)
.055 234750
(1.4)
.070 234751
(1.8)
* Use with shut off spring 110402, see parts page 26.
310692D
Fluid
Needle Needle
Assy. Tip
234765 234777
234765 234777
234767 234778
234767 234778
234767 234778
234767 234778
234769 234779
234770 234780
234766 234781*
234768 234782*
234768 234782*
Needle/Nozzle Typical
Kit Uses
234829 Light
Stains
234830
234831 Low
Viscosity
234832
234833 Medium
Viscosity
234834
234835 High
Viscosity-
Adhesives
234836
234774 Nozzle
and
needle tip
234775
made from
hardened
234776
stainless
steel for
longer life
Nozzle, Needle, and Tip Selection
low flow
high flow
7