Graco DELTA SPRAY XT GUN 310692D Instructions - Parts Manual page 20

Table of Contents

Advertisement

6. Loosen the hex nut (9) with the gun tool (28).
9
F
. 26
IG
7. Remove the spray housing (2A) and insert (4).
2A
4
F
. 27
IG
20
Replacing the spray housing o-rings and
packings
1. With the spray housing (2A) removed from the insert
(4), use a mechanical pick to remove the o-ring (2B)
from the housing (2A).
2B
ti4978a
F
. 28
IG
2. Remove o-ring (34) from the insert (4).
O-ring (2B) is slightly larger than o-ring (34).
3. Install a new o-ring (34) into the insert (4). Install a
new o-ring (2B) into the housing (2A).
NOTE: To ease o-ring installation, place the insert
(4) into the spray housing (2B) to plug the end.
Install one end of the o-ring into the groove in the
housing, then press the rest of the o-ring into place.
ti4830b
4
2A
36
Service
ti4829b
310692D

Advertisement

Table of Contents
loading

This manual is also suitable for:

Delta spray xt

Table of Contents