16) CI (Chassis Intrusion, Case Open)
This 2-pin connector allows your system to enable or disable the "case open" item in BIOS if the
system case begin remove.
17) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily shor
1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
Pin No.
1
1
2
Short: Clear CMOS
1
Open: Normal
1
- 29 -
Hardware Installation Process
Definition
Signal
GND