Table of Contents
Advertisement
Settings
Being visible for 2 minutes is set by
default.
- To change the visibility time length,
tap the Menu Key
timeout. Choose from 2 minutes, 5
minutes, 1 hour, or Never time out.
- Supported profiles are HFP/HSP, A2DP,
AVRCP, OPP, FTP(Server) ,HID, PAN, MAP
and PBAP.
Mobile data
You can select whether to enable or
disable mobile data. You can check the
current data usage, set to enable/disable
mobile data, or set the mobile data limit.
Mobile data - Tap the switch
enable mobile data.
Limit mobile data usage - Checkmark to
set the mobile data usage limit.
Data usage cycle - Allows you to
change the data usage cycle to display in
the graph.
Call
Configure phone call settings such as call
forwarding and other special features
offered by your carrier.
80
> Visibility
to
Fixed dialing numbers – Turn on
and compile a list of numbers that can
be called from your phone. You'll need
your PIN2, which is available from your
operator. Only numbers within the fixed
dial list can be called from your phone.
Voicemail – Allows you to select your
carrier's voicemail service.
Incoming call popup – Displays an
incoming call popup when using Camera
and Videos.
Call reject – Allows you to set call
rejection and manage the reject list.
Decline with message – When you
want to reject a call, you can send a quick
message instead. This is useful if you
need to reject a call during a meeting.
This menu allows you to manage the
messages you can send.
Connection vibration – Vibrates your
phone when the other party answers
the call.
Privacy keeper – Hides the caller name
and number for an incoming call.
Power button ends call – Allows you
to end the call by pressing the Power/
Lock Key.
Advertisement
Table of Contents
