Epson CX7300 Instruction page 3

Ink supply system

Hide thumbs Also See for CX7300:

① reset button. ② switch.

Push it upside until it is locked by the third clip in the red circle.

If the switch is turned to up place,then CISS

should work with original cartridge.

If the switch is turned to down palce, then CISS

Can work without original cartridge.

Step 5: Install CIS Catridges

Move the carriage to the left side

Make the cartridge round the printer cover as above show

Move the carriage back to the

original position

Put in the special cartridge of CISS according to

A sound Da will heard when the clip locks the cartridge completely

the color mark and lock the cartridge.

Step 6: Fix the Support Arm and Tube line

Fit the support arm like the picture shown

Fix the balance arm on the support arm.

Fix the tube on the support arm as the above

picture