Selecting A Stitch - Brother CE7070PRW Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Selecting a stitch

Using the stitch selection keys, select the desired
stitch.
When the sewing machine is turned on, the straight
stitch ( left needle position) is selected.
a Turn on the sewing machine.
b Press
number of the selected stitch is displayed.
Press the "+" or "–" side of
reduce the number by one. Pressing
right changes the digit on the right and pressing
on the left changes the digit on the left.
The stitch is selected.
(stitch selection keys). The
to increase or
c Attach the presser foot indicated in the LCD.
The display location of the presser foot type
differs depending on the model.
This manual shows, as an example, the LCD
(illustration above) of models where the presser
foot type appears above the number of the
selected stitch.
a Presser foot type
• For details, refer to "Replacing the presser
foot" (page 34).
Memo
● The presser foot to be used is indicated by
the letter (J, A, etc.) that appears above or
on the
beside the stitch number.
If necessary, adjust the stitch length and
d
width.
• For details on sewing with each of the utility
stitches, refer to the following example.
2
37