Biostar TZ77B Setup Manual

Biostar TZ77B Setup Manual

Setup manual
Hide thumbs Also See for TZ77B:

Advertisement

TZ77B/TZ75B/T77 Setup Man ual
FCC Information and Copyright
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. There is no guarantee
that interference will not occur in a particular installation.
The vendor makes no representations or warranties with respect to the
contents here and specially disclaims any implied warranties of merchantability
or fitness for any purpose. Further the vendor reserves the right to revise this
publication and to make changes to the contents here without obligation to
notify any party beforehand.
Duplication of this publication, in part or in whole, is not allowed without first
obtaining the vendor's approval in writing.
The content of this user's manual is subject to be changed without notice and
we will not be responsible for any mistakes found in this user's manual. All the
brand and product names are trademarks of their respective companies.
Dichiarazione di conformità
sintetica
Ai sensi dell'art. 2 comma 3 del D.M.
275 del 30/10/2002
Si dichiara che questo prodotto è
conforme alle normative vigenti e
soddisfa i requisiti essenziali richiesti
dalle direttive
2004/108/CE, 2006/95/CE e
1999/05/CE
quando ad esso applicabili
Short Declaration of conformity
We declare this product is complying
with the laws in force and meeting all
the essential requirements as specified
by the directives
2004/108/CE, 2006/95/CE and
1999/05/CE
whenever these laws may be applied

Advertisement

Table of Contents
loading

Summary of Contents for Biostar TZ77B

  • Page 1 TZ77B/TZ75B/T77 Setup Man ual FCC Information and Copyright This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
  • Page 2: Table Of Contents

    Table of Contents Chapter 1: Introduction ........1 Before You Start..................1 Package Checklist ..................1 Motherboard Features................2 Rear Panel Connectors................4 Motherboard Layout................. 5 Chapter 2: Hardware Installation ......6 Installing Central Processing Unit (CPU) ..........6 FAN Headers....................8 Installing System Memory ................
  • Page 3: Chapter 1: Introduction

    TZ7 7 B / TZ7 5 B / T7 7 CHAPTER 1: INTRODUCTION EFORE TART Thank you for choosing our product. Before you start installing the motherboard, please make sure you follow the instructions below: Prepare a dry and stable working environment with sufficient lighting.
  • Page 4: Motherboard Features

    7.1 channels audio out ALC892 High Definition Audio Codec USB3.0 Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) Data transfer rates up to 600 MB/s PCI slot Supports PCI expansion cards PCI Express Gen3 x 16 slot Supports PCI-E Gen3 x16 expansion card...
  • Page 5 Connect to USB3.0 devices Audio Jack Provide Audio-In/Out and Mic. connection Board Size 220 (W) x 295 (L) mm Biostar reserves the right to add or remove support OS Support Windows XP / Vista / 7 for any OS with or without notice...
  • Page 6: Rear Panel Connectors

    Motherboard Manual ANEL ONNECTORS PS/2 Keyboard USB2.0X2 HDMI DVI-D USB3.0X2 USB2.0X2 Center Line In Rear Line Out Side Mic In NOTE: USB3.0 ports (only supported by Windows 7) are backward compatible with USB2.0/USB1.X devices. NOTE: Maximum resolution: HDMI: 1920 x 1200 @60Hz, compliant with HDMI 1.4a DVI: 1920 x 1200 @60Hz VGA: 2048 x 1536 @75Hz NOTE:...
  • Page 7: Motherboard Layout

    TZ7 7 B / TZ7 5 B / T7 7 OTHERBOARD AYOUT USB_KBMS1 CPU_FAN1 ATXPWR2 Socket 1155 C PU1 USB3_0 RJ45USB1 F_AUDIO1 AUDIO1 SYS_FAN2 ATXPWR1 PEX16_1 JCMOS1 Intel CODEC Z77/Z75 BIOS PEX1_1 JFRONT_USB3_1 SATA1 SATA2 JSPDIFOUT1 PEX16_2 SATA3 SATA4 SATA6 SATA5 PCI1 Super...
  • Page 8: Chapter 2: Hardware Installation

    Motherboard Manual CHAPTER 2: HARDWARE INSTALLATION (CPU) NSTALLING ENTRAL ROCESSING Notice: Remove Pin Cap before installation, and make good preservation for future use. When the CPU is removed, cover the Pin Cap on the empty socket to ensure pin legs won’t be damaged. The motherboard might equip with two different types of pin cap.
  • Page 9 TZ7 7 B / TZ7 5 B / T7 7 Step 3: Hold processor with your thumb and index fingers, oriented as shown. Align the notches with the socket. Lower the processor straight down without tilting or sliding the processor in the socket. Step 4: Close the load plate.
  • Page 10: Fan Headers

    Motherboard Manual FAN H EADERS These fan headers support cooling-fans built in the computer. The fan cable and connector may be different according to the fan manufacturer. Connect the fan cable to the connector while matching the black wire to pin#1.
  • Page 11: Installing System Memory

    TZ7 7 B / TZ7 5 B / T7 7 NSTALLING YSTEM EMORY A. Memory Modules Unlock a DIMM slot by pressing the retaining clips outward. Align a DIMM on the slot such that the notch on the DIMM matches the break on the Slot.
  • Page 12 Motherboard Manual B. Memory Capacity DIMM Socket Total Memory DDR3 Module Location Size DDR3_A1 512MB/1GB/2GB/4GB/8GB DDR3_A2 512MB/1GB/2GB/4GB/8GB Max is 32GB. DDR3_B1 512MB/1GB/2GB/4GB/8GB DDR3_B2 512MB/1GB/2GB/4GB/8GB C. Dual Channel Memory Installation Please refer to the following requirements to activate Dual Channel function: Install memory module of the same density in pairs, shown in the table.
  • Page 13: Connectors And Slots

    TZ7 7 B / TZ7 5 B / T7 7 ONNECTORS AND LOTS SATA1/SATA2: Serial ATA3 Connectors The motherboard has a PCI to SATA Controller with 2 channels SATA interface, it satisfies the SATA 3.0 spec and with transfer rate of 6.0Gb/s. Assignment Ground Ground...
  • Page 14 Motherboard Manual PEX16_1: PCI-Express Gen3 x16 Slot PCI-Express 3.0 compliant. Maximum theoretical realized bandwidth of 16GB/s simultaneously per direction, for an aggregate of 32GB/s totally. PCI-E 3.0 is supported by Core i7-3xxx / i5-3xxx CPU. PEX16_2: PCI-Express Gen2 x4 Slot PCI-Express 2.0 compliant.
  • Page 15 TZ7 7 B / TZ7 5 B / T7 7 PCI1/PCI2: Peripheral Component Interconnect Slots This motherboard is equipped with 2 standard PCI slots. PCI stands for Peripheral Component Interconnect, and it is a bus standard for expansion cards. This PCI slot is designated as 32 bits. PCI 1 P CI2 ATXPWR2: ATX Power Source Connectors...
  • Page 16 Motherboard Manual ATXPWR1: ATX Power Source Connector This connector allows user to connect 24-pin power connector on the ATX power supply. Assignment Assignment +3.3V +3.3V -12V +3.3V Ground Ground PS_ON Ground Ground Ground Ground Ground PW_OK Standby Voltage+5V +12V +12V Ground +3.3V Note:...
  • Page 17: Chapter 3: Headers & Jumpers Setup

    TZ7 7 B / TZ7 5 B / T7 7 CHAPTER 3: HEADERS & JUMPERS SETUP OW TO ETUP UMPERS The illustration shows how to set up jumpers. When the jumper cap is placed on pins, the jumper is “close”, if not, that means the jumper is “open”.
  • Page 18 Motherboard Manual F_USB1/F_USB2: Headers for USB 2.0 Ports at Front Panel These headers allow user to connect additional USB cable on the PC front panel, and also can be connected with internal USB devices, like USB card reader. Assignment +5V (fused) +5V (fused) USB- USB-...
  • Page 19 TZ7 7 B / TZ7 5 B / T7 7 F_AUDIO1: Front Panel Audio Header This header allows user to connect the front audio output cable with the PC front panel. This header supports HD and AC’97 audio front panel connector. Assignment Mic Left in Ground...
  • Page 20: Clear Cmos Procedures

    Motherboard Manual JCMOS1: Clear CMOS Header Placing the jumper on pin2-3 allows user to restore the BIOS safe setting and the CMOS data. Please carefully follow the procedures to avoid damaging the motherboard. Pin 1-2 Close: Normal Operation (default). Pin 2-3 Close: Clear CMOS data.
  • Page 21 TZ7 7 B / TZ7 5 B / T7 7 BIOS POST Code/CPU Temperature Indicator This indicator will show POST code while booting. After the booting sequence, it will show current CPU temperature through hexadecimal figure. Please refer to Chapter 6.3 for all the BIOS POST codes. On-Board Buttons There are 2 on-board buttons.
  • Page 22: Chapter 4: Raid / Ahci Functions

    Motherboard Manual CHAPTER 4: RAID / AHCI FUNCTIONS PERATING YSTEM SATA CHIP Controller Supporting OS Configuration Intel Z77/Z75/H77 AHCI Windows XP SP2 (32 and 64 bit) SATA1/SATA2/ Windows Vista SP2 (32 and 64 bit) SATA3/SATA4/ Windows 7 (32 and 64 bit) SATA5/SATA6 Intel Z77/Z75/H77 RAID...
  • Page 23: Raid Arrays

    TZ7 7 B / TZ7 5 B / T7 7 Enable RAID / AHCI Driver when installing Windows 7/Vista Before you start Windows installation, copy the proper files for the Windows version to any USB storage. Windows 7 32 Windows 7 64 Windows Vista 32 Windows Vista 64 SATA1/SATA2/...
  • Page 24: How Raid Works

    Motherboard Manual RAID W ORKS RAID 0: The controller “stripes” data across multiple drives in a RAID 0 array system. It breaks up a large file into smaller blocks and performs disk reads and writes across multiple drives in parallel. The size of each block is determined by the stripe size parameter, which you set during the creation of the RAID set based on the system environment.
  • Page 25 TZ7 7 B / TZ7 5 B / T7 7 RAID 1: Every read and write is actually carried out in parallel across 2 disk drives in a RAID 1 array system. The mirrored (backup) copy of the data can reside on the same disk or on a second redundant drive in the array.
  • Page 26 Motherboard Manual RAID 10: RAID 1 drives can be stripped using RAID 0 techniques. Resulting in a RAID 10 solution for improved resiliency, performance and rebuild performance. Features and Benefits Drives: Minimum 4, and maximum is 6 or 8, depending on the platform. ­...
  • Page 27 TZ7 7 B / TZ7 5 B / T7 7 RAID 5: RAID 5 stripes both data and parity information across three or more drives. It writes data and parity blocks across all the drives in the array. Fault tolerance is maintained by ensuring that the parity information for any given block of data is placed on a different drive from those used to store the data itself.
  • Page 28: Intel Smart Response Technology

    ECHNOLOGY With Intel(R) Smart Response Technology, the performance of RAID with an Intel SSD drive can be improved better. This function is only for TZ77B and T77. Installing Smart Response Technology 1. Install RAID drives (RAID 0, 1, 5) and an Intel SSD.
  • Page 29: Chapter 5: T-Series Uefi Bios & Software

    TZ7 7 B / TZ7 5 B / T7 7 CHAPTER 5: T-SERIES UEFI BIOS & SOFTWARE UEFI BIOS ERIES T-Series UEFI BIOS Features Overclocking Navigator Engine (O.N.E.) Self Recovery System (S.R.S) Smart Fan Function BIO-Flasher: Update UEFI BIOS file from USB Flash Drive !! WARNING !! For better system performance, the UEFI BIOS firmware is being continuously updated.
  • Page 30 Motherboard Manual NOTE Overclock is an optional process, but not a “must-do” process; it is not recommended for inexperienced users. Therefore, we will not be responsible for any hardware damage which may be caused by overclocking. We also would not guarantee any overclocking performance. B.
  • Page 31 TZ7 7 B / TZ7 5 B / T7 7 CPU Smart FAN This item allows you to control the CPU Smart Fan function. CPU FAN Calibrate Press [ENTER] to calibrate CPU FAN. Control Mode This item provides several operation modes of the fan. Fan Ctrl OFF(℃) When CPU temperature is lower than this value, the CPU fan will keep lowest RPM.
  • Page 32: T-Series Software

    Motherboard Manual ERIES OFTWARE Installing T-Series Software Insert the Setup DVD to the optical drive. The driver installation program would appear if the Auto-run function has been enabled. Select Software Installation, and then click on the respective software title. Follow the on-screen instructions to complete the installation. Launching T-Series Software After the installation process is completed, you will see the software icon showing on the desktop.
  • Page 33 TZ7 7 B / TZ7 5 B / T7 7 The CPU tab provides information on the CPU and motherboard. The Memory tab provides information on the memory module(s). You can select memory module on a specific slot to see its information. The OC Tweaker tab allows you to change system clock settings and voltages settings.
  • Page 34 Motherboard Manual 3 Pre-set Modes: V6, V12, AUTO for different overclocking experience. The HW Monitor tab allows you to monitor hardware voltage, fan speed, and temperature. Besides, you also can set related values for CPU Smart Fan.
  • Page 35 “Live Update.” Green Power II Utility BIOSTAR G.P.U II (Green Power Utility) is a new function. The utility enhances energy efficiency by disabling extra phases while CPU is on light loading; it features 4+1 power phases, current power saving, and toal power saving. This tool integrates a friendly GUI to monitor your CPU Usage, CPU Watt, and CPU Temperature.
  • Page 36 Motherboard Manual G.P.U Mode Setting This utility provides five modes, upon your requirements, to improve system performance or to save power consumption. Note: Even if the modes saving more power consumption are chosen, the system still can keep excellent performance. Auto Phase Mode System switches the mode automatically according to current system loading condition.
  • Page 37 TZ7 7 B / TZ7 5 B / T7 7 eHot-Line (Optional) eHot-Line is a convenient utility that helps you to contact with our Tech-Support system. This utility will collect the system information which is useful for analyzing the problem you may have encountered, and then send these information to our tech-support department to help you fix the problem.
  • Page 38 Motherboard Manual Enter the file name and then click “Save”. Your system information will be saved to a .txt file. Open the saved .txt file, you will see your system information including motherboard/BIOS/CPU/video/ device/OS information. This information is also concluded in the sent mail.
  • Page 39 TZ7 7 B / TZ7 5 B / T7 7 BIOS Update BIOS Update is a convenient utility which allows you to update your motherboard BIOS under Windows system. Show current BIOS information AWARD BIOS AMI BIOS Clear CMOS function (Only for AWARD BIOS) Save current BIOS to a .bin file...
  • Page 40 Motherboard Manual <Update BIOS> Before doing this, please download the proper BIOS file from the website. For AWARD BIOS, update BIOS procedure should be run with Clear CMOS function, so please check on Clear CMOS first. Then click Update BIOS button, a dialog will show for asking you backup current BIOS.
  • Page 41 TZ7 7 B / TZ7 5 B / T7 7 (Optional) BIOScreen Utility This utility allows you to personalize your boot logo easily. You can choose JPG or BMP as your boot logo so as to customize your computer. Please follow the following instructions to update boo logo: 1.
  • Page 42: Chapter 6: Useful Help

    Motherboard Manual CHAPTER 6: USEFUL HELP RIVER NSTALLATION After you installed your operating system, please insert the Fully Setup Driver DVD into your optical drive and install the driver for better system performance. You will see the following window after you insert the DVD The setup guide will auto detect your motherboard and operating system.
  • Page 43: Extra Information

    TZ7 7 B / TZ7 5 B / T7 7 XTRA NFORMATION CPU Overheated If the system shutdown automatically after power on system for seconds, that means the CPU protection function has been activated. When the CPU is over heated, the motherboard will shutdown automatically to avoid a damage of the CPU, and the system may not power on again.
  • Page 44: Ami Bios Post Code

    Motherboard Manual AMI BIOS P Checkpoint Description Disable NMI, Parity, video for EGA, and DMA controllers. Initialize BIOS, POST, Runtime data area. Also initialize BIOS modules on POST entry and GPNV area. Initialized CMOS as mentioned in the Kernel Variable "wCMOSFlags."...
  • Page 45 TZ7 7 B / TZ7 5 B / T7 7 Checkpoint Description Displaying sign-on message, CPU information, setup key message, and any OEM specific information. Initializes different devices through DIM. See DIM Code Checkpoints section of document for more information. USB controllers are initialized at this point.
  • Page 46: Troubleshooting

    Motherboard Manual 6.4 T ROUBLESHOOTING Probable Solution There is no power in the system. Make sure power cable is Power LED does not shine; the securely plugged in. fan of the power supply does not Replace cable. work Contact technical support. Indicator light on keyboard does not shine.
  • Page 47 TZ7 7 B / TZ7 5 B / T7 7 This page is intentionally left blank.
  • Page 48: Appendix: Spec In Other Languages

    Unterstützt High-Definition Audio ALC892 Audio-Unters 7.1-Kanal-Audioausgabe tützung USB3.0 Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) Datenübertragungsraten bis zu 600 MB / s PCI-Steckplatz PCI Express Gen3 x16 Steckplatz Steckplätze PCI Express Gen2 x16 Steckplatz(x4) x1 PCI Express Gen2 x 1-Steckplatz SATA3-Anschluss Jeder Anschluss unterstützt 1 SATA3-Laufwerk...
  • Page 49 Rückseiten-E DVI-Anschluss LAN-Anschluss USB2.0-Anschluss USB3.0-Anschluss Audioanschluss Platinengröße 220 mm (B) X 295 mm (L) Biostar behält sich das Recht vor , ohne Ankündigung OS-Unterstüt Windows XP / Vista / 7 die Unterstützung für ein Betriebssystem zung hinzuzufügen oder zu entfernen.
  • Page 50: French

    Prend en charge la DDR3 (OC) 1800/ 2000/ 2200/ Mémoire Capacité mémoire maximale de 32 Go 2400 Chaque DIMM prend en charge des DDR3 de Prend en charge la DDR3 (OC) 1866/2133 (TZ77B, principale 512Mo/1Go/2Go/4Go/8Go TZ75B) Les DIMM à registres et DIMM avec code correcteurs d'erreurs ne sont pas prises en charge Taux de transfert jusqu'à...
  • Page 51 Port USB3.0 Fiche audio Dimensions 220 mm (l) X 295 mm (H) de la carte Biostar se réserve le droit d'ajouter ou de supprimer Support SE Windows XP / Vista / 7 le support de SE avec ou sans préavis...
  • Page 52: Italian

    Supporto audio High-Definition (HD) ALC892 audio HD Uscita audio 7.1 canali USB3.0 Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) Velocità di trasferimento dati fino a 600 MB / s Alloggio PCI Alloggio PCI Express Gen3 x16 Alloggi Alloggio PCI Express Gen2 x16(x4) x1...
  • Page 53 Porta USB3.0 Connettore audio Dimension 220 mm (larghezza) x 295 mm i scheda (altezza) Biostar si riserva il diritto di aggiungere o Sistemi operativi Windows XP / Vista / 7 rimuovere il supporto di qualsiasi sistema supportati operativo senza preavviso.
  • Page 54: Spanish

    Soporte de sonido de Alta Definición ALC892 Salida de sonido de 7.1 canales sonido HD USB3.0 Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) Tasas de transferencia de datos hasta 600 MB / s Ranura PCI Ranura PCI Express Gen3 x16 Ranuras...
  • Page 55 Tamaño de 220 mm. (A) X 295 Mm. (H) la placa Soporte de Biostar se reserva el derecho de añadir o retirar el Windows XP / Vista / 7 sistema soporte de cualquier SO con o sin aviso previo. operativo...
  • Page 56: Portuguese

    Suporta a especificação High-Definition Audio ALC892 Saída de áudio de 7.1 canais de alta definição Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) Taxas de transferência de dados até 600 MB / s USB3.0 Ranhura PCI Ranhura PCI Express Gen3 x16...
  • Page 57 Tomada de áudio Tamanho 220 mm (L) X 295 mm (A) da placa Sistemas A Biostar reserva-se o direito de adicionar ou Windows XP / Vista / 7 remover suporte para qualquer sistema operativo operativos com ou sem aviso prévio.
  • Page 58: Polish

    Obsługa High-Definition Audio ALC892 7.1 kanałowe wyjście audio audio HD USB3.0 Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) Cena transferu danych do 600 MB / s Gniazdo PCI Gniazdo PCI Express Gen3 x16 Gniazda Gniazdo PCI Express Gen2 x16(x4) x1 Gniazdo PCI Express Gen2 x 1 Złącze SATA3...
  • Page 59 Port DVI Port LAN Port USB2.0 Port USB3.0 Gniazdo audio Wymiary 220 mm (S) X 295 mm (W) płyty Obsluga Biostar zastrzega sobie prawo dodawania lub systemu Windows XP / Vista / 7 odwoływania obsługi dowolnego systemu operacyjne operacyjnego bez powiadomienia.
  • Page 60: Russian

    поддержка Звуковая поддержка High-Definition ALC892 7.1канальный звуковой выход жесткого диска Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) скорости передачи данных до 600 МБ / с USB3.0 Слот PCI Слот PCI Express Gen3 x16 Слоты Слот PCI Express Gen2 x16(x4) Слот...
  • Page 61 ввода-выв USB3.0-порт ода Гнездо для подключения наушников Размер 220 мм (Ш) X 295 мм (В) панели Biostar сохраняет за собой право добавлять или Поддержка Windows XP / Vista / 7 удалять средства обеспечения для OS с или без предварительного уведомления.
  • Page 62: Arabic

    ‫ﺗﺪﻋﻢ ﺗﻘﻨﻴﺔ اﻟﺼﻮت ﻋﺎﻟﻲ اﻟﺘﻌﺮیﻒ ﻣﻦ‬ ‫دﻋﻢ اﻟﺼﻮت ﻋﺎﻟﻲ‬ ALC892 ‫ﻗﻨﻮات ﻟﺨﺮج اﻟﺼﻮت‬ ‫اﻟﺘﻌﺮیﻒ‬ ‫ﺛﺎﻧﻴﺔ / ﺏﺎیﺖ ﻣﻴﻐﺎ 006 إﻟﻰ ﺗﺼﻞ ﺏﻴﺎﻧﺎت ﻧﻘﻞ ﻣﻌﺪﻻت‬ Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) USB3.0 ‫ﻋﺪد‬ ‫ﻓﺘﺤﺔ‬ ‫ﻋﺪد‬ PCI Express Gen3 ‫ﻓﺘﺤﺔ‬...
  • Page 63: Smart Fan

    ‫اﻟﺨﻠﻔﻴﺔ‬ ‫اﻟﻠﻮﺣﺔ‬ ‫ﻋﺪد‬ USB2.0 ‫ﻣﻨﺎﻓﺬ‬ ‫ﻋﺪد‬ USB3.0 ‫ﻣﻨﺎﻓﺬ‬ ‫ﻋﺪد‬ ‫ﻣﻘﺒﺲ ﺹﻮت‬ ‫ارﺗﻔﺎع‬ ‫ﻣﻢ‬ ‫ﻋﺮض‬ ‫ﻣﻢ‬ ‫اﻟﻠﻮﺣﺔ‬ ‫ﺣﺠﻢ‬ ‫ ﺗﺤﺘﻔﻆ‬Biostar ‫أو‬ ‫ﺏﺈﺧﻄﺎر‬ ‫ﺗﺸﻐﻴﻞ‬ ‫ﻧﻈﺎم‬ ‫ﻷي‬ ‫اﻟﺪﻋﻢ‬ ‫إزاﻟﺔ‬ ‫أو‬ ‫إﺿﺎﻓﺔ‬ ‫ﻓﻲ‬ ‫ﺏﺤﻘﻬﺎ‬ Windows XP / Vista / 7 ‫اﻟﺘﺸﻐﻴﻞ‬ ‫أﻧﻈﻤﺔ‬ ‫دﻋﻢ‬ ‫إﺧﻄﺎر‬...
  • Page 64: Japanese

    Realtek RTL 8111E 半/全二重機能 ALC892 HDオーディ ハイデフィニションオーディオのサポート オのサポート 7.1 チャンネルオーディオアウト USB3.0 Z77 (TZ77B) / Z75 (TZ75B) / H77 (T77) データ転送速度最大600 MB /秒の PCIスロット PCI Express Gen3 x16スロット スロット PCI Express Gen2 x16スロット(x4) x1 PCI Express Gen2 x 1スロット SATA3コネクタ 各コネクタは1つのSATA3デバイスをサポートします...
  • Page 65 CMOSクリアヘッダ 各コネクタは2つのフロントパネルUSB2.0ポートをサポ USB2.0コネクタ ートします 各コネクタは2つのフロントパネルUSB3.0ポートをサポ USB3.0コネクタ ートします 消費者IRコネクタ シリアルポート S/PDIFアウトコネクタ デジタルオーディオアウト機能をサポートします 電源コネクタ(24ピン) 電源コネクタ(8ピン) PS/2キーボード HDMIポート VGAポート DVI-Dポート 背面パネル LANポート USB2.0ポート USB3.0ポート オーディオジャック ボードサイズ 220 mm (幅) X 295 mm (高さ) Biostarは事前のサポートなしにOSサポートを追加または OSサポート Windows XP / Vista / 7 削除する権利を留保します。 2012/04/10...

This manual is also suitable for:

Tz77mxeTz75bT77

Table of Contents